Specifications

ManualsBrandsPYLE Audio ManualsAudio MixerPYD1958

Professional

Audio

Section 4

103

Order Toll Free

1-800-543-4330,

FAX

1-800-765-6960

103

Order Toll Free

1-800-543-4330

Fax

1-800-765-6960

Gold Seal Series

Mixer Amplifiers

Designed specifically with the Sound Contractor in

mind, Gold Seal Series amplifiers combine unique

and useable features with ultra high reliability

and pro performance at a minimum price. Available

in 60W, 100W, 150W and 250W models, there is a

perfect fit for any application. Aphex

Aural Exciter

Circuit adds presence and intelligibility to vocals

when paging. The dual function 10 band equalizer

can be used for feedback control or acoustic

shaping, providing ±12dB of boost or cut from

62.5Hz~16KHz in acoustic mode and from

125Hz~8KHz in feedback control mode. Other

features include automatic level control, automatic

muting with a VOX circuit, and a variable mute

level. Inputs: Six Lo-Z balanced microphone, 2 Hi-Z

auxiliary sources and a telephone paging input (Mic

5 is switch-selected for mic or telephone line; Mic 6

is switch-selected for microphone or Aux 1). Mics 1

through 4 use XLR-type connectors, Aux input is via

RCA phono jacks and all other connectors use screw

terminals. Phantom power is supplied for use with

condenser microphones. Microphone precedence

connections are included for mic 1, 2, 3, 5/Tel, 6/Aux

1 and Aux 2. Outputs: •Taps for 4ohm and 8ohm

speakers, and for 25V, 25VCT, 70V and 100V line

•Line out for booster amp and tape recorder

•Preamp out/power amp in loop is provided to insert

signal processing equipment Specifications:

•Frequency response: 20Hz~20KHz •THD: 0.3%

•S/N ratio: -94dB or better (-60dB or better

mic inputs 1~6) •Dimensions: 3

⁄2" (H) x 16

⁄2" (W) x

12" (D) •Three-year warranty

Order # Model # Description (ea.)

555-3520 GS-60 60 watt $479.00

555-3525 GS-100 100 watt 554.00

555-3530 GS-150 150 watt 641.00

555-3535 GS-250 250 watt 837.00

1.5 Watt Utility Amplifier

Ideal for

music-on-hold

or line

amplification,

the Bogen

Model GA-2 is

a rugged,

compact 1.5

watt amplifier

designed to

meet the

requirements

of continuous low-power audio applications. It can

also be used to drive monitor speakers, headphones,

or as a line amplifier. High-impedance input is

available via phono jack or screw terminals. Only

50mV is required for full output. A choice of 8ohm or

600ohm output is provided. Screwdriver adjustable

volume control is provided on the chassis. Sturdily

constructed of galvanized steel (#20 gauge). The

amplifier is compact and easily mounted on a wall or

in any convenient location. Dimensions: 5

⁄2" (W) x

⁄8" (H) x 2

⁄2" (D). UL listed. Mfr. #GA-2.

Order # (ea.)

555-3600 $92.19

C Series PA Amps

•Balanced low impedance mic inputs•#80-1320, 80-1325 and 80-1330 mix three inputs for two mic/one aux. or

one mic/two aux. operation •#80-1310 and 80-1315 mix two inputs for two mic or one mic/one aux. •Built-in mic

precedence circuit •#80-1310 and 80-1315 have input and output matching to a telephone line

Power Consumption

Power Frequency Distortion Outputs (Impedance) @ Dimensions

Order # Mfr. # Output Response ±2dB @ RPO Bal/unbal Lines 120VAC, 60Hz (W) x (H) x (D) Wt. (ea.)

80-1310 C10 10W 80Hz~10KHz <3% 4 (unbal), 8~16ohm, 25V & 70V 46W 11

⁄8"x2

⁄8" x 8

⁄4" 7 lbs. $167.00

80-1315 C20 20W 80Hz~10KHz <3% 4 (unbal), 8~16ohm, 25V & 70V 60W 11

⁄8" x 2

⁄8" x 7

⁄4" 8 lbs. 199.00

80-1320 C35 35W 100Hz~10KHz <2%, 100Hz~10KHz 8~16ohm, 25VCT, 70V 96W 14

⁄2" x 3

⁄4" x 10

⁄8" 15 lbs. 279.00

80-1325 C60 60W 100Hz~10KHz <2%, 100Hz~10KHz 8~16ohm, 25VCT, 70V 170W 14

⁄2" x 3

⁄4" x 11" 17 lbs. 349.00

80-1330 C100 100W 80Hz~10KHz <2%, 100Hz~10KHz 4~16ohm, 25VCT, 70V 250W 14

⁄2" x 3

⁄4" x 11" 22 lbs 399.00

#80-1315

#80-1320

Wall Mount FM Tuner

Economical wall mount FM radio/receiver is

designed to provide background music over a

PA system, or music-on-hold to a telephone

system. Includes 1W and line-level outputs

to facilitate compatibility with a variety of

paging/telephone systems. Built–in speaker

makes tuning easy. LED indicator illuminates

when the signal is strongest, and AFC prevents

signal drift. Tone and

output volume controls

are screwdriver

adjustable. Screw

terminals are provided

for outputs, antenna

and 24V power

source. Also

has attached

telescopic antenna.

Specifications:

•Tuning range:

87.5~108.5MHz

•Sensitivity: 8mV

•Power requirements:

12VDC or 24VDC,

250mA •Dimensions:

⁄16" (H) x 3

⁄8" (W) x

⁄2" (D)

Order # Model # Description (ea.)

555-3630 FMR FM tuner $84.95

555-3645 PRS40C Power supply 24.95

Matching Audio

Transformer

General purpose matching

transformer allows proper

connection between high and

low impedance inputs and

outputs. Bi–directional device may be

used to balance an unbalanced line, or

provide isolation between two pieces of

equipment. It may also be used to produce

a balanced mic level signal from a line

level source such as a CD, DVD or tape

player, or computer sound card. Primary:

10Kohm, RCA type male connector.

Secondary: 600ohm center tapped, with screw

terminals. Steel enclosure measures 2

⁄8" (H) x

2" (H) x 1

⁄4" (D) and includes mounting ears.

Order # Mfr. # (ea.)

555-2855 WMT1A $29.50

AM/FM Stereo Tuner

Ideal as a background music

source in sound systems of all sizes. Digital PLL

synthesized tuner provides 87.5~107.9MHz FM and

530~1620KHz AM reception. Allows presets of up

to 18 FM and 12 AM stations. Output provided

via RCA female connections. Includes AM loop and

FM dipole antennas. Also includes stereo patch cable

and stereo–to–mono patch cable. Requires 120VAC,

8W. Dimensions: 10.55" (W) x 7.17" (D) x 1.65"

Order # Mfr. # Description (ea.)

555-3625 TP350D AM/FM tuner $221.00

555-2876 RPK46A Rack mount kit 28.50

Voice

Activated Relay

This device monitors audio activity over a wide

range of input voltages and operates a DPDT relay.

It may be used to detect voltages as low as that

directly from a microphone, or as high as from a 70V

speaker system. Inputs include: Mic level, 600ohm

line level, 25V and 70V distributed speaker level. A

low level, transformer isolated, 600ohm output is

also made available for use with other equipment,

allowing this to be used as a balanced, low

impedance microphone preamp. Features:

•Adjustable trigger threshold •Adjustable mic

preamp gain •Adjustable 0.25~20 second release

delay •Relay status LED •All input and output

connections are screw terminal •Requires

12~24VDC, 100mA, power supply sold separately

Order # Mfr. # Description (ea.)

555-2870 VAR1 Voice activated relay $105.00

555-3645 PRS4-0C 12VDC, 300mA 24.95

Signaling Tone

Generator

Multiple tone

generator is

designed to

generate four

distinct signals;

pulsed tone, slow

whoop, repeating

chime and steady tone. It is an excellent source for

alarm or pre-announce signals in public address or

telephone paging systems. Each of the four signals

may be applied continuously (until interrupted), or

limited to a double-burst (except for the steady tone)

for pre-announce applications. Signals are triggered

by an external device providing a contact closure.

Output level and pitch control are adjustable.

Accepts Hi-Z input from a program source such

as a tuner, turntable, cassette player, etc., and

will maintain precedence over the program material

for the duration of the contact closure. Requires

12~48VDC, 26mA, adaptor (PRS-40C) available

separately. All input and output connections are

screw terminals. Dimensions: 6

⁄4" (W) x 5

⁄4" (H) x

2" (D). Mfr. #TG-4C.

Order # (ea.)

555-3615 $121.00

C50 pg 103 7/21/05 10:01 AM Page 103