Specifications

Professional
Audio
84
Order Online
www.mcminone.com
NET 30
Terms
4
Rack Mount
Stereo Amplifiers
Continuous duty amplifiers feature built-in fan
cooling to withstand the rigors of nonstop club and
mobile DJ applications. Models may be operated in
stereo mode with loads as low as 4ohm, or in bridged
mode with an 8ohm load. Features: •Large
illuminated VU meters •Thermal, over current, short
circuit and DC protection •Clip and protection LED
indicators •RCA,
1
⁄4" and balanced XLR inputs
•Binding post and
1
⁄4" outputs •Dimensions: 30.5" (H)
x 19.5" (W) x 18.5" (D) Specifications: •Frequency
response: 20Hz~20KHz •S/N ratio: 100dB •Input
impedance: 20Kohm •Power rating is based on stereo
mode, RMS per channel, at 8ohm
Order # Model # Power Output (ea.) (2-up)
555-7170 PA-2500 200W x 2 CH $239.00 $215.00
555-7175 PA-3500 300W x 2 CH 299.00 269.00
555-7177 PA-4500 400W x 2 CH 379.00 341.10
555-7176 PA-5500 500W x 2 CH 449.00 404.10
Professional
Stereo Preamplifier
Versatile preamplifier provides convenient input
selection of multiple sources to a stereo amplifier.
A separate selector provides independent source
selection of the Record-Out function. Intended for
listening to one source, while recording another,
this two-bus feature also enables fixed level output
to an independent amplifier for “second room” control.
Features: •Volume, balance, bass midrange and
treble controls •Loudness and stereo/mono selectors
•High/low filters •Phono 1, phono 2, mic/aux, tape 1,
tape 2, and tuner inputs •Tape dubbing •Two
1
⁄4"
unbalanced mic inputs •RCA in/out connections
•110/220VAC supply voltage selection •Rack
mount or shelf use •Rugged steel chassis
•Dimensions: 2.36" (H) x 16.92" (W) x 7.87" (D)
Order # (ea.) (2-up)
555-2905 $109.00 $98.10
Back
Professional
1000 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier
provides 175W RMS x 2 channels, 500W
maximum x 2 channels into 8ohm, with
THD better than 0.1%. Features include:
•Bridging capability for 1000W single
channel output •Front panel left and right gain controls •Left and right lighted analog dual range VU meters
•A/B speaker selector •LED clipping indicator •Rack mount chassis with handles •Heavy duty binding post
speaker connections •RCA and
1
⁄4" input connections •Heavy duty aluminum heatsinks with cooling fan
•Switchable 110/220V operation Specifications: •Output at 4ohm 1000W x 2 channels •Frequency response
•10Hz~50KHz •S/N ratio 90dB (A-weighted) •Speaker
impedance 4~16ohm •Dimensions 19" (W) x 5
1
⁄8" (H)
x 13" (D) •Mfr. #PT2000
Order # (1-3) (4-up)
555-7070 $269.00 $259.00
Professional 800 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier
provides 140W RMS x 2 channels, 400W
maximum x 2 channels into 8ohm, with
THD better than 0.10%. Features
include: •Front panel left and right gain
controls •Left and right lighted analog
dual range VU meters •A/B speaker selector •LED clipping indicator •Rack mount chassis with handles •Heavy
duty binding post speaker connections •RCA and
1
⁄
4" input connections •Heavy duty aluminum heatsinks with
cooling fan •Switchable 110/220V operation Specifications: •Output at 4ohm: 800W x 2 channels •Frequency
response •10Hz~50KHz •S/N ratio 90dB (A-weighted)
•Speaker impedance 4~16ohm •Front panel dimensions:
19" (W) x 5" (H). Chassis dimensions: 16
1
⁄2" (W) x 5" (H)
x 12" (D). •Mfr. #PT1600
Order # (1-3) (4-up)
555-7065 $245.00 $235.00
Professional Home/Studio
Stereo Preamplifier
May be used on a tabletop or
mounted in a rack, making it
suitable for professional or high end home use. Front panel includes an input for microphone, with level
control. Rotary controls adjust volume, loudness, bass, treble and midrange. Other features include hi/low filter,
stereo/mono mode selector. Push buttons select from up to five inputs labeled Tape, Tuner, CD, Aux and Phono.
All inputs accept standard line level, except phono input which accepts low level for magnetic cartridge.
Specifications: •Input sensitivity: •Mic: 0.5mV/600ohm •Phono: 3mV/47Kohm •Others 150mV/47Kohm
•Output level: •Tape out: 150mV/100Kohm •Pre out: 500mV/4Kohm •THD: <0.4% •Frequency response:
5Hz~30KHz •Connections: Mic input:
1
⁄4", all others RCA
type female •Power requirement: 120/220VAC 50~60Hz
•Dimensions 19" (W) x 2
3
⁄8" (H) x 8
1
⁄2" (D) •Mfr. #PR-2500
Order # (ea.) (2-up)
555-4051 $74.95 $67.50
Professional
Home/Studio
Stereo Crossover
Professional three way, six channel crossover is suitable for club or high end home use. Ideal for any multi-amp
application. Provides the following adjustments: Low •Low pass cuttoff of 50Hz, 90Hz, 180Hz, 360Hz,
720Hz; Mid •High pass cutoff of 50Hz, 90Hz, 180Hz, 360Hz, 720Hz •Low pass cutoff of 1KHz, 2KHz, 4KHz,
6KHz, 8KHz; High •High pass cutoff of 1KHz, 2KHz, 4KHz, 6KHz, 8KHz. Features include: •Individual level
control for low, mid and high frequency channels •Rack mount chassis with handles •RCA input and output
connections •Switchable 110/220V operation Specifications: •Filter slope 12dB/octave •Frequency response
•20Hz~20KHz •S/N ratio 90dB •THD ±0.01%
•Dimensions 19" (W) x 2
3
⁄8" (H) x 8
1
⁄2" (D) •Mfr. #SEA-3000
Order # (ea.) (2-up)
555-4050 $69.95 $62.95
Professional 1000 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier provides
175W RMS x 2 channels, 500W maximum x 2
channels into 8ohm, with THD better than 0.05%.
Features include: •Bridging capability •A/B
speaker selector •LED clipping indicator •Heavy
duty binding post speaker connections •RCA and
1
⁄4"
input connections •Heavy duty aluminum heatsinks
with cooling fan •Switchable 110/220V operation
Specifications: •Output at 4ohm 1000W x 2
channels •Frequency response: 10Hz~50KHz •S/N
ratio 90dB (A-weighted) •Speaker impedance
4~16ohm •Dimensions 19" (W) x 5
1
⁄8" (H) x 13" (D)
•Mfr. #PA1000X
Order # (ea.) (2-up)
555-4060 $229.00 $207.00
Professional 800 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier provides
140W RMS x 2 channels, 400W maximum x
2 channels into 8ohm, with THD better than 0.10%.
Features include: •Front panel left and right gain
controls •Left and right lighted analog dual range
VU meters •A/B speaker selector •LED clipping
indicator •Rack mount chassis with handles •Heavy
duty binding post speaker connections •RCA and
1
⁄4"
input connections •Heavy duty aluminum heatsinks
with cooling fan •Switchable 110/220V operation
Specifications: •Output at 4ohm: 800W x
2 channels •Frequency response •10Hz~50KHz
•S/N ratio 90dB (A-weighted) •Speaker impedance
4~16ohm •Front panel dimensions: 19" (W) x 5" (H)
•Chassis dimensions: 16
1
⁄2" (W) x 5" (H) x 12" (D)
•Mfr. #PA800X
Order # (ea.) (2-up)
555-3180 $205.00 $185.00
Professional 600 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier provides
95W RMS x 2 channels, 300W maximum x 2
channels into 8ohm, with THD better than 0.05%.
Features include: •Front panel left and right gain
controls •A/B speaker selector •LED clipping
indicator •Rack mount chassis with handles
•Heavy duty binding post speaker connections
•RCA and
1
⁄4" input connections •Heavy duty
aluminum heatsinks •Switchable 110/220V
operation Specifications: •Output at 4ohm 600W x
2 channels •Frequency response •10Hz~50KHz
•S/N ratio 90dB (A-weighted) •Speaker impedance
4~16ohm •Dimensions 19" (W) x 5
1
⁄8" (H) x 13" (D)
•Mfr. #PA600X
Order # (ea.) (2-up)
555-4055 $165.00 $148.50
Section 4
C50 pg 084 7/20/05 3:23 PM Page 84