Specifications

ManualsBrandsPYLE Audio ManualsAudio MixerPYD1958

Professional

Audio

Section 4

Order Toll Free

1-800-543-4330,

FAX

1-800-765-6960

Order Toll Free

1-800-543-4330

Fax

1-800-765-6960

S-COM Four Channel Compressor/Gate

Compact, versatile single space device provides four channels of high quality dynamics processing with an

expander/gate and compressor/limiter on each channel. The four channels operate independently or in stereo pairs.

Multi-segment LED metering displays input/output level as well as gain reduction. Expander/gate section features a

continuously variable. Threshold control as well as a switch for fast or slow release times. Compressor/limiter

section includes variable Threshold, Ratio and Output levels. Special Enhancer switch restores high frequencies that

are sometimes diminished by heavy compression. This wide-ranging combination of features makes this an efficient

and versatile audio tool for a wide variety of applications. Additional features: •5 segment LED meters, for in/out

levels, and gain reduction on each channel •Servo balanced inputs and outputs with XLR and

⁄4" TRS connectors

•SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee based on the input signal level

•Individual threshold and ratio controls on each channel Specifications: •Frequency response: 20Hz~20KHz

•Dynamic range: 95dBu (un–weighted) •THD: 0.008% •Max input level: +21dBu •Max output level: +21dBu

•Power requirement: 120VAC, 60Hz •Detailed specifications

available upon request

Order # (ea.)

555-2150 $139.00

YEAR LIMITED

3 WARRANTY

S-Com Dual Channel Signal Processor

Single rack space, dual channel dynamics processor

features advanced circuit design to control signal

levels in a variety of applications. Each channel

combines an expander/gate, compressor/limiter

and enhancer circuit, with independent control,

to reduce noise, increase loudness and recover lost

frequencies. The expander/gate function features a

variable threshold level and selector for fast or slow

release times. Open/closed LED indicators make it

easy to monitor the gates operation. Compressor/

limiter controls include threshold, ratio, attack,

release, output and auto function. While in auto

mode, the S-Com constantly analyzes the audio

input and adjusts the attack and release parameters

based on the changing input level. The enhancer

switch engages an enhanced frequency recovery

circuit, which restores high frequencies that are

sometimes diminished by heavy compression. Key

input and key listen allow external triggering or

EQ. Other features: •12 segment LED meters for

input/output and gain reduction •Servo balanced

inputs and outputs on XLR and

⁄

4" connectors •SKD

(Smart Knee Detector) circuit switches from soft to

hard knee based on the level of input signal applied

Specifications: •Frequency response: 10Hz~20KHz

•Dynamic range: 116dBu (un-weighted) •THD:

0.008% (effect out), 0.016% (effect in) •Max input

level: +21dBu •Max output level: +21dBu

•Detailed specifications available upon request

•Model #S-Com

Order # (ea.)

555-6555 $99.95

YEAR LIMITED

3 WARRANTY

S-Com Plus Dual Channel Signal Processor

Single rack space, dual channel dynamics processor

provides all of the features of the S-Com processor,

plus a functional de-esser and peak limiter. The

de-esser improves audio quality by removing “S”

from vocals and sibilance from overly bright signal

sources such as cymbals. Extensive metering

includes input/output, gain reduction, de-esser

level, gate open/close and limit. Specifications:

•Frequency response: 10Hz~20KHz •Dynamic

range: 116dBu (un-weighted) •THD: 0.008%

(effect out), 0.016% (effect in) •Max input level:

+21dBu •Max output level: +21dBu •Detailed

specifications available upon request

•Model #S-Com Plus

Order # (ea.)

555-6556 $119.95

YEAR LIMITED

3 WARRANTY

31 Band

Equalizers

Feature packed 1/3

octave equalizers

offer total control of

31 frequency bands

from 20Hz~20KHz.

Constant Q circuitry

ensures that

bandwidth of the

selected frequency

stays the same, even

when approaching

the maximum boost

or attenuation. The

gain/boost range may be set at ±6dB, or ±12dB for added flexibility and precision. Cut–Only mode allows

0~12dB attenuation with full slider range. Available in single channel (#555-7540) and two channel (#555-7545)

configurations, each channel independently includes each of the following. Features: •Variable low cut filter from

15Hz~200Hz •Electronically balanced XLR and

⁄4" TRS inputs and outputs •Relay controlled bypass switch, with

LED indicators •Center LED marker on each frequency fader •Eight segment LED bargraph VU meter •Relay

power on circuitry to prevent speaker thumps •All steel, rack mount chassis Specifications: •Frequency

response: 10Hz~70KHz •THD: <0.013% Center frequencies: 20Hz, 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz,

100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz, 400Hz,

500Hz, 630Hz, 800Hz, 1KHz, 1.25KHz, 1.6KHz, 2.5KHz,

3.15KHz, 4KHz, 5KHz, 6.3KHz, 8KHz, 10KHz,

12.5KHz, 16KHz, 20KHz

Order # Model Channels (ea.)

555-7540 S–Curve 131 One $149.00

555-7545 S–Curve 231 Two 229.00

#555-7540

#555-7545

Two–Channel 31

Band Equalizer

•Two rack space •Independent controls for both

channels on each 1/3 octave ISO standard frequency

•40Hz 12dB/octave high pass filter •16KHz

12dB/octave low pass filter •Active balanced XLR and

TRS

⁄4" inputs and outputs •Unbalanced RCA inputs

and outputs •Ground lift switch •Variable input level

control •Automatic bypass with power off •Selectable

boost/cut range of 6dB or 12dB •Dimensions: 3.5" (H)

x 19" (W) x 8.6" (D) •Mfr. #PPEQ231

Order # (1-3) (4-up)

555-7770 $189.00 $172.00

Stereo 12 Band Equalizer

•Constant Q circuitry maintains 3% center frequency

accuracy •Unbalanced RCA inputs and outputs

•Independent controls for both channels •Variable

input level control •Post/pre switch •Source selector

•Line 1, line 2 and tape inputs •Line and tape

outputs •110V/220VAC operation •Dimensions:

5.2" (H) x 19" (W) x 7.4" (D) •Mfr. #PPEQ86

Order # (1-3) (4-up)

555-7775 $69.00 $64.95

Rack Mount

Balanced Mic Mixer

Features: •Connect up to six microphones •Channel

six is mic/line switchable •Feedback filter with rotary

control •Mix bus for connecting multiple units

•Rotary volume controls for each input, plus master

level control •XLR and

⁄4" mic inputs •RCA line input

• XLR and

⁄4" mic level outputs •

⁄4" and RCA line level

outputs •Frequency response 20Hz~20KHz

•110V/220VAC operation •Dimensions: 2.5" (H) x

19" (W) x 7

⁄86" (D) •Mfr. #PYM6

Order # (1-3) (4-up)

555-7780 $119.00 $105.00

Three–Way Active Crossover

Single rack stereo crossover accepts

L/R line level input, and provides

L/R high frequency, L/R mid frequency, L/R low

frequency and mono subwoofer outputs. Features:

•Precision Linkwitz–Riley 24dB/octave crossover

filters •Phase inversion switch •Switchable subsonic

filter •Balanced XLR inputs and outputs •Horn

equalization for constant directivity horns •Peak

LED indicators •Occupies a single rack space •115dB

dynamic range •Selectable 110VAC/220VAC input

voltage •1RU rack mount chassis

Order # Model # (1–3) (4–up)

555-6920 PPCX3 $105.00 $94.50

Two–Way Active Crossover

Single rack stereo crossover accepts

L/R line level input, and provides

L/R high frequency, L/R low frequency and mono

subwoofer outputs. Features: •Precision

Linkwitz–Riley 24dB/octave crossover filters

•Phase inversion switch •Switchable subsonic

filter •Balanced XLR inputs and outputs •Horn

equalization for constant directivity horns •Peak

LED indicators •Occupies a single rack space •115dB

dynamic range •Selectable 110VAC/220VAC input

voltage •1RU rack mount chassis

Order # Model # (1–3) (4–up)

555-6915 PPCX2 $91.95 $82.76

C50 pg 099 7/21/05 9:43 AM Page 99