Specifications

Professional
Audio
Section 4
96
Order Online
www.mcminone.com
NET 30
Terms
4
31-Band Single-Channel
1
⁄3 Octave Equalizer
Available in single or two-channel versions, these
feature packed equalizers offer total control of 31
frequency bands from 20Hz~20KHz. Each band
provides 20mm slides, switchable 6dB or 12dB of
boost or cut, for precise tonal control. Constant Q
circuitry ensures that the bandwidth of the selected
frequency stays the same, even when approaching
the maximum boost or attenuation. Adjustable
high and low pass filter allow additional control for
removing noise and rumble. Features: •Adjustable
10Hz~250Hz low cut filter •Adjustable 3KHz~40KHz
high cut filter •Active balanced and unbalanced
inputs and outputs •XLR,
1
⁄4" TRS and RCA type
phono connections •Wide adjustable range is
compatible with consumer and pro gear •LED clip
level indicators •Ground-lift switch •Independent
bypass switch on each channel •Rugged all-steel
rack mount construction requires only 1RU height
(two-channel occupies 2RU) Center frequencies:
20Hz, 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz,
125Hz, 160Hz, 200Hz, 250Hz, 315Hz, 400Hz, 500Hz,
630Hz, 800Hz, 1KHz, 1.25KHz, 1.6KHz, 2.5KHz,
3.15KHz, 4KHz, 5KHz, 6.3KHz, 8KHz, 10KHz,
12.5KHz, 16KHz, 20KHz Specifications: •Frequency
response: 20Hz~20KHz ±0.5dB •Channel separation:
>50dB •S/N ratio: 94dB •THD: <0.01% •Power
requirements: 95~130VAC, 50Hz/60Hz
Order # Model Dimensions (ea.)
555-3146 351 1.75" (H) x 19" (W) x 8.5" (D) $99.00
555-3147 355 3.5" (H) x 19" (W) x 8.5" (D) 169.00
#555-3146
#555-3147
TUBE-MP Microphone
Preamplifier
Considered the world’s
most popular external
microphone preamp,
the TUBE-MP utilizes
a hand picked 12AX7
preamplifier tube, to add
warmth and fatness to a signal while maintaining
exceptionally low noise and high quality. Designed for
use with a microphone, the TUBE-MP also functions
as an exceptional direct box, impedance matching,
amplifying and improving the sound of any device
plugged into it. Features: •48V Phantom power
output •Phase reverse •Variable input and output
gain controls •Balanced XLR and
1
⁄4" inputs and
outputs •Portable, all steel construction
Specifications: •Frequency response: 10Hz~20KHz
•Dynamic range: >100dB (20Hz ~ 20KHz) •THD:
<0.1% •Dimensions: 2" (H) x 5.5" (W) x 5" (d)
•Power requirements: 9VAC, AC adaptor included
Order # (ea.)
555-3160 $49.00
TUBE MP-OPL™
Microphone
Preamplifier
Includes all of the
capabilities of the
world-famous TUBE-MP
(#555-3160), with the
additional feature of ART’s OPL™ (Output Protection
Limiter), which precisely and accurately controls and
maintains the output peak signal. The OPL circuitry
is crucial in protecting quality of sound in
environments such as a hard disk recording systems
or a PC sound card. Available with the analog VU
meter, all features and specifications remain the same
as the original TUBE-MP.
Order # Model VU Meter (ea.)
555-3162 TUBE MP STUDIO Yes $69.00
Digital Feedback Eliminator
Stereo feedback eliminator automatically determines
feedback frequency and attenuates to needed level to
effectively end the problem. Three modes of operation
provide enhanced control and convenience. Single
Shot Mode: •Automatically searches and eliminates
feedback, and locks filters until manually reset
Auto Mode: •Continually monitors the mix,
resetting programmed filters automatically Manual
mode: •Allows manual setting of up to 12 fully
parametric filters including frequency, bandwidth
and gain Features: •Internal 32 bit processing with
48KHz sampling rate •24 bit A/D and D/A convertors
with 64/128 times oversampling for high headroom
and resolution •Automatically searches and
eliminates up to 2 x 12 frequencies (per channel) •24
fully programmable parametric filters that can be set
manually or via MIDI •Balanced XLR and
1
⁄4" TRS
inputs and outputs •Dual ten segment LED bargraph
display •Compact rack mount design occupies a
single rack space
Order # (ea.)
555-7445 $159.00
Palm
Size Audio Analyzer
Highly accurate palm sized
analyzer provides the
sound engineer the tools
needed to set up any sound
environment. The center
jog dial allows easy,
one-handed access to
all functions and menus.
Features: •Real time
spectrum analysis
•31 ISO band display from
21Hz~20KHz •16 memory
slots to store position
conditions and averages •SPL measurement
30~130dB •Line level signal measurement in dBµ,
dBV or volts •A, C or flat weighting •Internal noise
generator with 29 test sounds including pink and
1KHz tone •EQ setting program •Easy calibration
with standard noise generator •Speaker phase
checking ability •Large 160 x 160 LCD display with
back light •Balanced XLR input and output
connections •RS-232 port •Included CD ROM with
software and test signals •Requires four “AA”
batteries (#292-020), not included
Order # (ea.)
555-7440 $399.00
PDB Series
Passive Direct Boxes
Available in single or dual channel, these roadworthy
boxes provide balanced signal to the mixing console
input, from virtually any sound source. Easily connect
electric guitar or bass pick-up, keyboard or other
unbalanced line level source, or post-amplifier
speaker level signal, to a mixing consoles balanced
input. Provided feed-through output enables
instrument or sound source to remain connected
to its own individual amplifier, while simultaneously
patching it to a mixer. Features: •50Kohm
1
⁄4"
unbalanced input •50Kohm
1
⁄4" unbalanced
feedthrough output •Selectable input attenuation
(0dB, -20dB, -40dB) •600ohm balanced XLR output
•Switchable output ground lift switch •Housed
in a rugged steel enclosure •Passive
device, requires no power
Order # Model Channels (ea.)
555-3155 PDB Single $32.00
555-3156 dPDB Dual 48.00
#555-3155
#555-3156
Phantom I Active
Direct Box
Phantom
powered box
provides balanced
microphone output,
ideal when a mixing
consoles mic input
must accept a signal
from consumer line level
devices, speaker outputs, or
unbalanced microphones. Parallel
1
⁄4" input jacks,
and high input impedance, allow easy loop through
to other equipment. XLR male connection provides
balanced output. Three position switch selects
0dB, 20dB and 40dB attenuation. Switchable
ground lift eliminates potential hum problems.
Specifications: •Input level: -10~+40dB •Output
level: -10~+2dB •Frequency response: 1Hz~50KHz
•S/N ratio: 100dB •Power requirements: 9~48VDC
phantom power at mic output
Order # (ea.)
555-2740 $29.95
Phantom III
Phantom
Power
Supply
48V supply
externally
provides power
to high quality
condenser
microphones, when
used with equipment not
supplying phantom power. Specifications: •Input
connection: Female XLR •Output connection: Male
XLR •Power requirements: Supplied 18VDC adaptor
•Dimensions: 5.25" (H) x 2.75" (W) x 1.75" (D)
Order # (ea.)
555-2750 $39.00
Phantom II Dual
Phantom Power
Supply
Switchable
12V/48V supply
externally
provides phantom
power to two
microphones. Ideal
when high quality
condenser microphones
are used with equipment not supplying phantom
power. Specifications: •Input connections: Female
XLR (2) •Output connections: Male XLR (2) •Power
requirements: Supplied 12VDC adaptor or
two 9V alkaline batteries •Dimensions:
5.625" (H) x 3.625" (W) x 1.75" (D)
Order # (ea.)
555-2745 $49.00
C50 pg 096 7/21/05 9:27 AM Page 96