Specifications
64
64
64
PDBT63
1.8’’ Die-Cast cloth Super Tweeter
• Die Cast Plastic Frame
• 360 Watts RMS/720 Watts Max
• 4 Ohm Impedance
• Power: 40W
• Frequency Response: 2 KHz-25 KHz
• Sensitivity: 105 dB/w/m
• Number of bolt holes: 4
• Bolt hole dimension: 4.5mm×6mm(4×)
• Diameter: F124.5mm
• Mounting depth: 83mm
• Total depth: 91 mm
PDBT68
3’’ Heavy Duty Aluminum Die-Cast Titanium Super Tweeter
• 3” Titanium Super Tweeter
• Die Cast Aluminum Frame
• 1200 Watts Max./ 4~8 Ohm
• Freq. Resp: 2000-25,000 Hz
• Sensitivity: 114 dB/ w/ m
• Crossover Capacitor Included
• 5” Diameter/ 2” Mounting Depth
PDBT78
2’’ Titanium Super Tweeter
• Die Cast Aluminum Frame
• Diamond Chrome Cutting Finish
• 2’’ High Temperature Kapton Voice Coil
• 20oz Magnet Structure
• 350 Watts RMS/700 Watts Peak
• 4-8 Ohms Impedance
• Sensitivity: 112 dB/W/M
• Frequency Response: 2kHz - 25kHz
• Mylar Crossover Capacitor Included
• Dimensions: 4’’ x 5’’ / 3’’ Mounting Depth
PH12S
Screw-On Type Constant Radiation Horn
• Material: ABS Resin
• Nominal Coverage Angle (HxV)-6 dB:90°x40°
• Cut Off Frequency: 1000 Hz
• Throat Diameter: 26mm
• Mounting Type: Zinc Screw Insert 1 3/8’’- 18 UNEF
• Dimensions: 11.6”H x 11.6”W x 9.8”D
PH515
Screw-On Type Constant Directivity Horn
• Material: ABS Glass Fiber
• Nominal Coverage Angle (HxV)-
6 dB: 90-’ba x 40-’ba
• Cut Off Frequency: 800 Hz
• Throat Diameter: 25.40mm (1’’)
• Mounting Flange Diameter: 76mm
• Mounting Hole Diameter: 5.6mm
• Dimensions: 7 7/8’’H x 12 1/2’’W x 10’’D
PH612
Screw-On Type Constant Radiation Horn
• Material: ABS Resin
• Nominal Coverage Angle (HxV)-6 dB:90°x40°
• Cut Off Frequency: 1000 Hz
• Throat Diameter: 26mm
• Mounting Type: Zinc Screw Insert 1 3/8’’- 18 UNEF
• Dimensions: 6.4”h x 11.9”w x 4.4”d
PH714
Screw-On Type Constant Radiation Horn
• Material: ABS Resin
• Nominal Coverage Angle (HxV)-6 dB:90°x40°
• Cut Off Frequency: 1000 Hz
• Throat Diameter: 26mm
• Mounting Type: Zinc Screw Insert 1 3/8’’ - 18 UNEF
• Dimensions: 6.25”h x 16.5”w x 8.65”d
Tweeters
Electronic Drum Kits