Specifications

61
61
61
PDB952
4’’ Titanium 8 Ohm Horn Bolt On Driver
• Midrange/Tweeter Compression Horn Driver
• Titanium Diaphragm
• Terminals 205-Type
• 4’’ (50.8mm) Flat Aluminum Voice Coil
• 116oz Magnet Structure
• Frequency Response:400Hz-15KHz
• Sensitivity:99db 1W/1M
• 8 Ohm Impedance
• 1200 Watts Watts Rms /600 Watts
Peak Power Handing
• Fits Horns With Four M6 Threaded Holes 90
Apart on 4” (102mm) Diameter Circle
• Overall Dimensions: 7’’ Diameter x 3.2’’ Depth
PDB958
4’’ Bolt On Titanium Neodymium Horn Driver
• Throat Diameter 50.8mm(2 in)
• Mounting Screw 4-M6-F102
• Nominal Impedance 8 OHM
• Rated Power 500 W RMS, 1000 W MAX
• Sensitivity(1W1M) 107dBwm
• Frequency Response 450 Hz – 13 kHz
• Voice Coil Diameter 99.2mm(4 in)
• Diaphragm Material Titanium
• Magnet Neodymium
• Outside Diameter 6.35 in.
• Net Weight 9.0 lbs.
• Shorting copper cap for extended HF response
PDBT13
3.75” Super Bullet Horn Tweeter
• 3.75’’ Aluminum Die-Cast Bullet Horn
• 1’’ Titanium Diaphragm
• 20 oz. Magnet
• 1’’ High-Temperature Voice Coil
• 4 Ohm Impedance
• 350 Watts Max.
• Frequency Repsonse: 3.5 kHz - 23 kHz
• SPL: 98dB (1W/1M)
PDBT18
3.75’’ Aluminum Bullet Titanium Horn Tweeter
• 3.75’’ Aluminum Horn
• 1’’ Super Tweeter
• 20 oz Magnet Structure
• 1’’ High Temperature Kapton Voice Coil
• Diamond Chrome Cutting Finish
• Ferro Fluid Enhanced Voice Coil
• 150 Watts RMS/300 Watts Peak
• Sensitivity: 99dB
• Frequency Response: 2kHz - 25kHz
• Mylar Crossover Capacitor Included
• 3.75’’ Diameter - 2’’ Mounting Depth
PDBT19
3.75’’ Aluminum Bullet Titanium Horn Tweeter
• 3.75’’ Aluminum Horn
• 1’’ Super Tweeter
• 20 oz Magnet Structure
• 1’’ High Temperature Kapton Voice Coil
• Ferro Fluid Enhanced Voice Coil
• 150 Watts RMS/300 Watts Peak
• Sensitivity: 98dB
• Frequency Response: 2 kHz - 25 kHz
• Mylar Crossover Capacitor Included
• 4-8 Ohms Impedance
• 3.75’’ Diameter - 2’’ Mounting Depth
PDBT21F
1.75’’ Heavy Duty Aluminum Die-Cast Titanium Super Tweeter
• 1.75’’ Titanium Super Tweeter
• Die Cast Aluminum Frame
• Crossover capacitor Included
• 300 Watts RMS
• 600 Watts Max. Power
• 30 Oz. Magnet Structure
• Sensitivity: 106dB/w/m
• Impedance: 4-8 Ohm
• Freq. Resp.:2,000Hz - 25,000Hz
PDBT23
1.75” Die-Cast Titanium Super Tweeter
• Die Cast Plastic Frame
• 180 Watts RMS/360 Watts Max
• 4 Ohm Impedance
• Frequency Response: 3 KHz-18 KHz
• Sensitivity: 98 dB/w/m
• Number of bolt holes: 4
• Bolt hole dimension: 4.5mm×6mm(4×)
• Diameter: F120mm
• Mounting depth: 53mm
• Total depth: 61 mm
Tweeters
Tweeters