Specifications

59
59
59
PSN1165
4.35’’ Dispersion Horn Piezo Tweeter
• 4.35’’ Square Super Horn Tweeters
• Frequency Response: 1.8kHz - 30kHz
• SPL: 93dB @ 1W/1M
• Excellent Transient Response
• Low Distortion
• Typical Impedance Appears as .3 UF Capacitor
• Light Weight Highly Reliable
• 200 Watts RMS/400 Watts Peak
• Complete Pair In Gift Box
• Suited 4-8 Ohm Impedance Applications
• A 30 Ohm Series Resistor is Recommended to
Assure Stability of Extended Range Ampliers
Preclude Hazard of Amplier Burn-Out
PSN1167
400 Watt 3.5’’ Dispersion Horn Piezo Tweeter
• 3.5’’ Square Piezo Horn Tweeter
• Frequency Response: 3.5KHz-25KHZ
• SPL: 93dB @ 1W/1M
• Excellent Transient Response
• Low Distortion
• Typical Impedance Appears as. 12 UF Capacitor
• Light Weight Higly Reliable
• 200 Watts RMS/400 Watts Peak
• Complete Pair In Gift Box
• Suited 4-8 Ohm Impedance Aplications
• A 30 Ohm Series Resistor is Recommended to
Assure Stability of Extended Range Ampliers
Preclude Hazard of Amplier Burn-Out
• Overall Dimensions: 3.5’’ x 3.5’’
• Cutout Dimensions: 2.75 x 2.75’’
• Screw Holes: 2.8’’
PSN1176
400 Watt 3’’ x 7.5’’ Dispersion Horn Piezo Tweeter
• 3” x 7.5” Square Piezo Horn Tweeter
• Frequency Response: 3.5KHz-20KHZ
• SPL: 94dB @ 1W/1M
• Excellent Transient Response
• Low Distortion
• Typical Impedance Appears as. 1 UF Capacitor
• Light Weight Higly Reliable
• 200 Watts RMS/400 Watts Peak
• Complete Pair In Gift Box
• Suited 4-8 Ohm Impedance Aplications
• A 30 Ohm Series Resistor is Recommended to
Assure Stability of Extended Range Ampliers
Preclude Hazard of Amplier Burn-Out
PKD480
1’’ Dynamic Horn Midrange/Tweeter
• Max Power Rating: 200 Watts
• Sensitivity: 96 dB (1W/1M)
• Frequency Response: 2k-22kHz
• Aluminum Die-Cast Cooler
• Neodymium Magnet System
• Removable Chrome Fronting
• 4 Ohm Impedance
• Hi-Tech & Clean Look
PDB252
1.5” Aluminum Horn Driver 8 Ohm 4-Bolt
• Midrange/Tweeter
• Compression Driver
• 1.5’’(35mm) Flat Aluminum Voice Coil
• 30 Oz. Magnet Structure
• Frequency Resp: 1.5K-20KHz
• Sensitivity: 95dB SPL !W 1M
• 8 Ohm Impedance
• 250 Watts RMS/500Watss Peak Power
• Fits Horns with Four M6 Threaded Holes 90
• Apart on 3’’ (76mm) Diameter Circle
PDB352
1.35” Titanium Horn Driver 8 Ohm 4-Bolt
• Midrange/Tweeter Compression Horn Driver
• Titanium Diaphragm
• Terminals 205-Type
• 1.35” (34.4mm) Flat Aluminum Voice Coil
• 25 Oz Magnet Structure
• Frequency Response: 800Hz-20KHz
• Sensitivity: 103dB @ 1W/ 1M
• 8 Ohm Impedance
• 200 Watts RMS /400 Watts Peak Power
• Fits Horns with Fou M6 Threaded Holes 90
Apart on 2.36” (60mm) Diameter Circle
• Overall Dimensions: 4” Diameter x 2.5” Depth
Horn Drivers / Tweeters
Tweeters