Specifications

www.MCMelectronics.com / 1-800-543-4330
72
Follow us on: &
Section
5
DJ/Prosound
AUDIO/VIDEO
5
CleanBOX Balanced/
Unbalanced Convertor
Two–way, stereo convertor provides total flexibility
when interfacing consumer and professional audio
equipment. Perfect when using tape decks, mp3 players,
computer sound cards with mixing consoles, sound
processors, professional preamplifiers and amplifiers.
Two stereo channels simultaneously match balanced to
unbalanced, and unbalanced to balanced equipment.
Stereo Channel 1: L/R unbalanced RCA female inputs
to L/R balanced male XLR outputs Stereo Channel 2:
L/R balanced female XLR inputs to L/R unbalanced
RCA female outputs. Each stereo channel has its own
level adjustment to compensate for line level differences
between pro and consumer gear. Specifications: •Max
output level: +18dB balanced, +12dB unbalanced
•Max input level: +22dB balanced and unbalanced
•Input gain: -8dB balanced, +20dB unbalanced
•Power requirements: 12VDC, AC adapter included
•Dimensions: 4.625" (H) x 5.625" (W) x 1.75" (D)
Order # ONLY
555-2705 $65.00
ProMIX Three
Channel Mic Mixer
Perfect when up to three
microphones must be used,
and only one mic input is
unavailable. The unit features three
balanced XLR female mic inputs, each
with independent level control, switchable phantom
power and switchable 3dB cut at 100Hz. Transformer
balanced output is provided via an XLR make
connector. An isolated headphone output is also
provided for local monitoring. Requires 18VDC; Two
alkaline 9V batteries (#292-035), not included, or
supplied 18V adapter. Specifications: •Phantom power
output: 12VDC •In/output impedance: 600ohm •THD:
<0.02% •Max output level: +14dB •Max input level:
-14dB •Maximum gain: +60dB •Dimensions: 5.625" (H)
x 3.75" (W) x 1.75" (D)
Order # ONLY
555-2770 $95.00
Project Series Tube
Microphone Preamplifier
Considered the world’s most popular external
microphone preamp, the TUBE–MP utilizes a hand
picked 12AX7 preamplifier tube, to add warmth and
fatness to a signal while maintaining exceptionally
low noise and high quality. Designed for use with a
microphone, it also functions as an exceptional direct
box, impedance matching, amplifying and improving
the sound of any device plugged into it. Features:
•Extremely low noise discrete front end •Up to 70dB of
clean, musical gain •High output signal drive capability
•Selectable input impedance •Switchable 48V phantom
power •Switchable FET limiter •XLR and
1
⁄4" inputs
and outputs •Phase invert selector •High cut selector
•Variable input and output controls Specifications:
•Frequency response: 10Hz~40KHz •Dynamic range:
>100dB (20Hz~20KHz) •THD: <0.05% •Dimensions:
1.75" (H) x 5.9" (W) x 6.5" (D) •Power requirements:
10VAC, AC adapter included
Order # ONLY
555-8430 $79.00
HeadAMP4
Headphone
Amplifier
This amplifier is ideal
when multiple headphones
need to be driven from one output. This unit features
four individual headphone outputs, with both
1
⁄4" and
3.5mm outputs, and their own level control. Input
accepts either size connector as well. The HeadAmp4 will
connect to virtually any source, and drive any headphone
configuration including studio phones, in-ear monitors
or custom ear pieces or any combination of the above.
Features: •Requires 12VDC, AC adapter included
•Dimensions: 3.75" (H) x 2.875" (W) x 1.5" (D)
Order # ONLY
555-2722 $65.00
MacroMIX
Four Channel
Personal Mixer
Compact active mixer
combines up to four line level
sources and provides line level
output. Input CH1 and CH2 have dual
mono summed RCA female inputs. Input CH3 accepts
either dual mono summed RCA, or
1
⁄4" mono input.
Input CH4 accepts
1
⁄4" mono input. Outputs include dual
mono RCA line level, and
1
⁄4" mono which may be used
as line level or headphone. Each input channel has its
own independent level control. Specifications: •Input
impedance: 10Kohm •Max gain: 40dB •S/N ratio: >90dB
•THD: 0.008% •Power requirements: 12VDC, adapter
included •Dimensions: 5.625" (H) x 3.75" (W) x 1.75" (D)
Order # ONLY
555-2725 $59.00
AVDirect
Multi-Input
Direct Box
Ideal in
applications
where iPods, laptops,
consumer DVD players,
or home theater components need to be connected
to a single XLR mic level input. This unit will accept
virtually any input connection and level, including
amplified speaker outputs, and provides balanced
XLR mic level output. Features: •L/R RCA line inputs
•3.5mm and
1
⁄4" stereo line level inputs •
1
⁄4" and push
terminal speaker level inputs •Switchable 4.8KHz high
cut filter •Ground lift switch •Variable level control
•Full 20Hz~20KHz frequency response •Dimensions:
1.75" (H) x 4.2" (W) x 3.5" (D)
Order # ONLY
555-7677 $55.00
iConnex Portable USB Soundcard with Phono Preamp
The iConnex is a plug and play USB powered sound card that coupled with your
favorite recording or DJ software allows you to add extra outputs for recording,
as well as a phono/turntable input for transferring your old vinyl, tape or CD
collection in one easy step. Features: •Phono input with grounding screw •16
bit/48KHz AD/DA convertor •Switched line or phono input •Rotary volume
control •RCA output •USB bus powered •Audacity recording software and
USB cable included •Windows and MAC compatible
Order # ONLY
555-11345 $38.49
Microphone
Splitter/
Combiner
The ART
SPLITCom
Pro can be used to split or combine balanced low
impedance microphone signals. Features: •Low
distortion with wide frequency response •Phase inverter
switch for subtractive combining •Galvanic isolation
to block phantom-power between channels •Ground
lift switch to reduce noise due to ground loops
Order # ONLY
555-10545 $35.00
Z-Direct Passive
Direct Box
High-quality passive
interface lets you connect
instrument, line, or speaker
level signals to a mixer or other
balanced input. High impedance, single-ended
(unbalanced)
1
⁄4" input is converted into an isolated,
balanced low impedance signal source. The internal
audio transformer has extremely flat and wide
frequency response and can handle high signal levels.
Input-attenuator switches allow selection of 0dB, -20dB
or -40dB for a wide range of signal levels and the input-
thru jack allows tapping off of the signal chain. The
ground-lift switch separates input and output signal
grounds to isolate two systems, reducing hum and
ground-loop noise. Additional features: •Switchable
30KHz low-pass bessel filter to cut out high frequency
RF and electrical interference •Phase invert switch
•Compact black anodized aluminum case
Specifications: •Frequency response: 10Hz~50KHz
•THD: 0.01% •Input and input-thru connection:
1
⁄4"
unbalanced, 50Kohm •Output connection: XLR male,
600ohm •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # Model ONLY
555-7675 Z-Direct $25.00
PHANTOM II PRO Dual
Phantom Power Supply
The Phantom II Pro is an invaluable tool in any
application where you need phantom power for your
microphones. Features: •XLR connectors for balanced
inputs and outputs •Low power, high efficiency CMOS
circuitry for long battery life using a standard 9V
battery •Can be powered with an external power supply
from AC mains •Rugged extruded aluminum case with
accessible battery compartment •LED lighted on/off
switch •Low noise, low distortion circuitry •Power
output: 48VDC
Order # ONLY
555-2746 $70.00
NEW!