Specifications

www.MCMelectronics.com / 1-800-543-4330
71
5
Section
5
DJ/Prosound
AUDIO/VIDEO
DTI Dual Channel Ground Loop Isolator
The DTI™ is a high quality, passive solution to ground
loop hum. Dual, high quality isolation transformers
provide ground path isolation between components,
while maintaining full frequency response. Features:
•Virtually indestructible, extruded aluminum enclosure
•
1
⁄4" TRS, XLR and RCA input and output connection
pairs, supporting balanced or unbalanced lines •Two
independent channels for correcting two ground loops,
or for processing a stereo signal Specifications:
•Frequency response: 10Hz~50KHz, ±0.5dB @ +4dBu
•THD: 0.01% typical @ 1KHz, +18dBu •Insertion loss:
0.4dB @ 100Kohm load, 5.5dB @ 600ohm load
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D) •Passive
device, requires no power •Mfr. #DTI
Order # ONLY
555-7685 $60.00
Balanced Audio
Ground Loop Isolator
Part of the BLOX series, this compact adapter provides
ground loop isolation on XLR type balanced lines.
Features: •Allows signal and ground isolation while
retaining 600ohm source and load impedance •Rugged
extruded housing •XLR male to female connection
•Frequency response: 15Hz~60KHz ±0.05dB •Insertion
loss: 1dB nominal •Maximum input level: +2dBm
(1.3V) •Mfr. #ISOBLOX
Order # ONLY
555-8460 $29.99
Unbalanced to Balanced
Convertor w/Attenuator
Part of the BLOX series, this
compact adapter combines the L/R line level audio
signal from standard consumer audio equipment,
and converts it to an XLR balanced mic level output.
Additonally, a variable attenuator allows control of
the output volume level. Features: •Rugged extruded
housing •Dual RCA male input connections •XLR male
output •Input impedance: 8Kohm •Output impedance:
580ohm •Max input level: +24dBm (3.3V) •Nominal
attenuation: 24dB •Mfr. #TDIBLOX
Order # ONLY
555-8466 $51.99
Unbalanced to
Balanced Convertor
Part of the BLOX series,
this compact adapter converts a
1
⁄4" unbalanced line
level signal to balanced XLR. Features: •Rugged
extruded housing •
1
⁄4" female high impedance input
•XLR male low impedance output •Mfr. #DBBLOX
Order # ONLY
555-8468 $18.99
Balanced to
Unbalanced Convertor
Part of the BLOX series, this compact adapter converts
an XLR balanced line level signal to unbalanced
1
⁄4".
Features: •Rugged extruded housing •XLR female low
impedance input •
1
⁄4" female high impedance output
•Mfr. #DBBLOXF
Order # ONLY
555-8464 $24.49
TUBE-MP Microphone
Preamplifier
Considered the world’s
most popular external
microphone preamp, the
TUBE-MP utilizes a hand
picked 12AX7 preamplifier
tube, to add warmth and fatness to a signal while
maintaining exceptionally low noise and high quality.
Designed for use with a microphone, the TUBE-MP
also functions as an exceptional direct box, impedance
matching, amplifying and improving the sound of any
device plugged into it. Features: •48V Phantom power
output •Phase reverse •Variable input and output gain
controls •Balanced XLR and
1
⁄4" inputs and outputs
•Portable, all steel construction Specifications:
•Frequency response: 10Hz~20KHz •Dynamic range:
>100dB (20Hz ~ 20KHz) •THD: <0.1% •Dimensions:
2" (H) x 5.5" (W) x 5" (D) •Power requirements: 9VAC,
AC adapter included
Order # ONLY
555-3160 $48.00
In–Line Fixed
Attenuators
Compact in–line attenuators are essential for correcting
problems caused by excessive signal in balanced lines.
Stage technicians can greatly benefit from keeping an
assortment of these units handy to solve unforeseen
level issues in the field. Features: •Rugged extruded
housing •Compact size •560ohm nominal impedance
•Traditional “H” type configuration •XLR male to
female connection •Functions in either direction
•Max input level +24dBm (3.6V)
Order # Mfr. # Attenuation ONLY
555-8472 PADBLOX-10 10dB $18.99
555-8474 PADBLOX-20 20dB 18.99
555-8476 PADBLOX-30 30dB 18.99
555-8478 PADBLOX-50 50dB 18.99
In-Line Variable Attenuator
Part of the BLOX series, this
compact adapter provides 0dB
to full attenuation of an XLR
type balanced line. Additionally, the rotary knob
may be pulled up for pop–free muting. Features:
•Rugged extruded housing •XLR male to female
connection •Maximum input level: +24dBm (3.6V)
•Mfr. #CVPBLOX
Order # ONLY
555-8462 $34.49
Stereo Microphone Preamp with USB
The USB Dual Pre is a full-featured high-quality dual
portable preamplifier and computer interface packed
into a compact rugged case. It is designed to work over
a wide variety of applications from remote field
recording to desktop/studio tracking. Features: •USB
connectivity •Low noise fully balanced XLR and
1
⁄4"
TRS combo inputs •Up to +48dB of clean gain •Built-
in low noise 48V phantom power supply •Latency free
monitoring •Mix and level controls •Independent
channel gain controls •
1
⁄4" TRS balanced monitor and
3.5mm headphone monitor outputs •Flexible 3-way
power from USB, included external supply, or 9V
battery Includes: •Audacity recording and production
software •USB cable •Compatible with Windows XP/
Vista and Apple OS 9.1/OSX •Mfr. #USBDUALPRE
Order # ONLY
555-4900 $79.00
Transformer Isolated
Microphone Splitter
The ProSplit provides one direct output and one transformer isolated
output from a single microphone. Features: •Ground-lift switch on
isolated output to reduce noise due to ground loops •Attenuator
pad switch on the input that can be used to alternately connect a
preamplified (line-level) signal to the two microphone-level outputs
Order # ONLY
555-10547 $50.00
Rackmounted Digital Recorder
The RM3 records directly onto any supported USB storage device or on the provided 1Gb SD memory card in mp3
or WAV format. Features: •Full color LCD screen •Records from any mono or stereo line source •Records 128, 256,
or 320 mp3 and WAV files •Combo XLR and
1
⁄4" microphone inputs with mic/line switch •Front and rear RCA
inputs •
1
⁄4" line input,
1
⁄4" line/headphone output •Balanced XLR outputs •RCA outputs •Easy playback of previous
recordings •AC adapter and USB cable included
Order # ONLY
555-11360 $202.00