PYD-1002/PYD-1005
Your PYLE PRO Series Performance Mixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.
Features and Controls: PYD1002 Mixer MIC 1(DJ Mic) Input Jack accepts balanced or unbalanced inputs with either XLR or 1/4” plug Dual Display Meter displays your choice of Master Input Left and Right Levels, or Phones Output Levels for CUE and PGM Meter Mode Switch and LED Indicators permit you to display either Cue and Summed Program levels OR Left and Right Channel Levels BNC lamp socket allows you to add a 12V/3W lamp to illuminate the control panel MIC Talkover Switch lowers the level of input sour
Features and Controls: PYD1005 Mixer MIC 1(DJ Mic) Input Jack accepts balanced or unbalanced inputs with either XLR or 1/4” plug Dual Display Meter displays your choice of Master Input Left and Right Levels, or Phones Output Levels for CUE and PGM MIC Talkover Switch lowers the level of input sources, permitting you to talk over them using a microphone Meter Mode Switch and LED Indicators permit you to display either Cue and Summed Program levels OR Left and Right Channel Levels BNC lamp socket allows
Presetting the Controls Before Use Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit.
Connecting the Mixer Inputs This mixer permits connection of up to eight (8) audio input sources, including up to two microphones.
Connecting the Mixer Inputs (cont.) 3. Turntables. Connect up to 2 turntables to the Phono 1 and Phono 2 input jacks. When using a turntable, you should also securely connect its ground wire (usually green or black) to the Ground screw on the input panel of the mixer.
Using the Mixer Controls Turning on the Mixer 1. Turn on the output amplifier and temporarily set its volume to the minimum setting. 2. On the mixer, turn ON the power switch. The adjacent power LED will illuminate. 3. Turn on the audio input sources you wish to mix, and set them to play (or talk continuously into the microphone). 4. To monitor the audio input sources so that you can decide when to mix in each input, see “Monitoring ‘Cueing’ the Inputs.” 5.
Mixing the Inputs Follow these steps to mix the audio input sources. 1. Perform Steps 1 and 2 of “Turning on the Mixer.” 2. Set the selected audio input source’s volume to its minimum setting, turn it on, and set it to play (or speak continuously into the microphone). 3.
Using the Microphone Incorporating Voice into the Mix To blend voice from the microphone with the audio program material, adjust the turn the MIC 1 Talkover Switch to ON and use the MIC1 level slider to increase or decrease the microphone level. This will not affect the main volume inputs. When the microphone is not in use, set the MIC level slider to “0.” Talkover Mode Talkover mode allows a voice to be heard clearly through the microphone by attenuating all the other audio input sources.
Using the Tone Controls To enhance the sound or tailor the highs, mids (PYD-1005) and low frequencies for audio source input to the acoustics of a particular performance environment, you can adjust the BASS, MID (PYD-1005) and TREBLE tone controls. Rotating the bass control, for example, will boost the bass frequencies in the bass range.
Using the Master Balance Control (PYD-1005) In the typical performance environment, you will want the sound to appear to be coming from a point midway between the speakers. If the sound appears to be louder from one speaker, adjust the Balance Control until the sound is properly balanced. Master Balance Control Using the Master Level Control The overall volume of the mix of all inputs is adjusted using the Master Level control.Turning this control clockwise increases the overall system volume.
Using the “Punch” Controls (PYD-1005 ) This featured control lets you smoothly and quickly turn a playing source on and off, or switch between the two different input sources assigned to Crossfade Channel A and B. The effect you get depends upon the position of the Crossfader. With the Crossfader at 100% Channel A (all the way to the left), pressing the Channel A Punch Button will mute the Channel A material.
Troubleshooting Your mixer should require very little maintenance. If you have problems, refer to the chart below for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance. PROBLEM POSSIBLE SOLUTION Nothing works • Check the AC connection. Make sure the AC outlet is “live.” • Check the power connection to the rest of the system (receiver/amplifier, etc.
Specifications PYD1002/1005 Input Sensitivity/Impedance Distortion Mic Phono 1-2 Line 1-4 Mic Phono Line 1.5 mV/600 Ohms 3.0 mV/50K Ohms 150.0 mV/27K Ohms 0.50% 0.08% 0.05% Tone Control Output Level Treble Master Zone(PYD-1005) Record 1.5 V/10-kOhms 1.
