Specifications

www.MCMelectronics.com / 1-800-543-4330
11
1
Section
01
Whole House Audio
AUDIO/VIDEO
Compact Stereo Amplifier
This extremely small amplifier chassis is perfect for
permanent installations. Typical applications include
use with flat panel televisions to drive one or two pairs
of speakers, digital signage installations, kiosk, POS
and similar retail environments. Features: •20W RMS
8ohm stereo, bridgeable to 40W RMS mono •Fanless
cooling for silent operation •Bass and treble controls
•RCA unbalanced line level inputs •Detachable screw
terminal speaker outputs •Detachable screw terminal
balanced inputs, mic/line switchable Specifications:
•Frequency response: 20Hz~25KHz •Total harmonic
distortion (THD): 0.05% •Dimensions: 2
1
⁄4" (H) x 7
3
⁄4"
(W) x 4
1
⁄2" (D) •Mfr. #SLA40
Order # MSRP ONLY
50-4608 $129.99 $88.99
Back
Distributed Audio
Stereo Receiver
This receiver is perfect for music listening in any room
of the home, with conventional left/right stereo output.
What sets this apart is four amplifier output channels,
creating a self contained, four-zone distributed audio
receiver. Up to four pairs of bookshelf, in-wall,
in-ceiling or outdoor speakers may be driven directly
from this unit, with independent selection of any or
all pairs. It is perfect in small residential or commercial
background music applications. Features: •AM/FM
tuner with 30 station presets •Five audio inputs
(including tuner) •Phono input •IR remote control
•Volume, bass and treble controls •Headphone jack
•Power output: 70W RMS x 4 (8ohm), 100W RMS
x 4 (4ohm) •THD: <0.2%, 20Hz~20KHz into 8ohm
•Dimensions: 5" (H) x 17
3
⁄8" (W) x 13" (D)
•Mfr. #RX-5502
Order # ONLY
50-4640 $160.00
Compact Stereo Amplifier with Auto On/Off
This extremely small amplifier chassis is perfect for
permanent installations. Typical applications include
use with flat panel televisions to drive one or two pairs
of speakers, digital signage installations, kiosk, POS
and similar retail environments. Auto on/off provides
convenience, as well as energy savings. Features: •20W
RMS x 2 channels at 8ohm •Automatic on/off with
adjustable sensitivity •Off delay: 10~11 minutes •Fanless
cooling for silent operation •Bass and treble controls
•RCA unbalanced line level inputs •Push terminal
speaker outputs Specifications: •Frequency Response:
20Hz ~ 25KHz •Total Harmonic Distortion (THD):
0.05% •Dimensions: 2
1
⁄4" (H) x 7
3
⁄4" (W) x 4
1
⁄2" (D)
•Mfr. #SLA40AUTO
Order # MSRP ONLY
50-4609 $129.99 $80.99
TM
Ultra Compact 40W Stereo Amplifier
Weighing in at less than 6 oz., this miniature stereo
amplifier is smaller than a deck of cards, yet delivers
an incredible 20W RMS per channel. It is perfect for
driving a pair of speakers directly from a portable
MP3 player or PC, flat panel TV or any other line or
headphone level source. 92% efficient digital amplifier
circuit is housed in a rugged extruded aluminum
enclosure and is convection cooled, ensuring whisper
quiet operation. Features: •3.5mm input •Included
3.5mm male/male cable •Detachable Phoenix style
speaker connections •LED power indicator •Includes
AC adapter Specifications: •Output: 20W x 2CH @
8ohm •THD 0.11% at 50% rated power •S/N ratio:
>99dB •Requires 24VDC, 2A •Dimensions: 1.0" (H)
x 2.2" (W) x 2.78" (D).
Order # ONLY
50-4600 $82.49
Single
Channel
Amplifier Module
Compact amplifier
is perfect for any
general purpose
application where a speaker needs to be driven from
a line level signal. Its compact size allows it to be
mounted most any place, and may be directly
attached to the rear of a speaker enclosure. It is ideal
for a wide variety of hobby, service and prototype
applications. Features: •RCA female input •Accepts line
level or headphone level signal •12" attached speaker
leads •Barrel type power connector Specifications:
•Input: Line level (80mV) •Output: 12W @ 4ohm
•Requires 6~16VDC, 800mA •Dimensions: 1
5
⁄8" (H)
x 2
7
⁄8" (W) x 2" (D)
Order # MSRP ONLY
50-4605 $29.95 $17.49
Compact Stereo Amplifier with USB Input
Designed specifically to power a pair of speakers
from a standard line level source, such as a CD player,
television, and MP3 player. A USB input also allows
connection to a desktop or laptop PC to power a set of
bookshelf speakers. Features: •20W RMS, 40W peak at
8ohm •Heavy-duty brushed aluminum faceplate •Three
position input selector •Stereo 3.5mm line level input
•RCA unbalanced line level subwoofer output •Heavy-
duty binding post speaker outputs Specifications:
•Frequency response: 20Hz~20KHz •Total harmonic
distortion (THD): 0.1% •Dimensions: 3.0" (H) x
10.8" (W) x 7.3" (D) •Mfr. #SLA 100
Order # MSRP ONLY
50-4606 $149.99 $112.00
Stereo Power Amplifiers
•Remote on/off triggering and signal sensing •Front
panel controls for level, balance and A/B speaker
selection •Two sets of L/R inputs •SLA 150 power
output: 7W RMS x 2 channels •SLA 250 power
output: 125W RMS x 2 channels
Order # Mfr. # MSRP ONLY
50-4610 SLA-150 $449.00 $227.00
50-4620 SLA-250 599.00 283.00
160W Stereo Power Amplifier
4A/B Speaker Selector
Featuring two auto-switching line level inputs and
auto on/off switching, this versatile amplifier is suitable
for a number of applications. Features: •A/B speaker
selection •Binding post terminals •One stereo line
output •Stereo/bridged mode selector •Balance control
and volume control •Power output: 80W RMS x 2
channels •Dimensions: 16 ½" (W) x 2
3
⁄8" (H) x 8 ¼" (D)
•Mfr. #PAMP1000
Order # ONLY
50-13700 $107.00
Six Pair Speaker
Distribution Strip
•Allows for connection of up to six speaker pairs to a
single amplifier •Removable screw terminal strips accept
up to 14AWG wire •Attached mounting plate allows
this to be easily mounted to a wall, or installed in most
structured wiring panels •Dimensions: 6½" (L) x 2" (W)
x 1¼" (H) Note: •Unit provides no impedance
protection, and is intended for use with 70V distributed
speakers, or 8ohm systems that utilize impedance
matching volume controls •Mfr. #WT6
Order # ONLY
50-13440 $59.99
NEW!