Specifications

www.MCMelectronics.com / 1-800-543-4330
15
1
Section
01
Whole House Audio
AUDIO/VIDEO
Simple IR Hub
Compact “Y” cable
“hub” allows simple
connection of one IR
emitter to one IR target.
Includes AC adapter: the only additional items required
are the actual target and emitter. Connections are
3.5mm female. Mfr. #IR-1200.
Order # ONLY
50-13004 $12.99
Expandable Amplified IR Hub
Compact hub acts as the central connection point for
multiple IR emitters and targets in a distributed system.
IR target input accepts either a 3.5mm plug, or screw
terminal connections for use with twisted pair cable.
Four 3.5mm IR outputs allow connection of multiple
emitters. Two LEDs are provided for power and LED
status indication. AC adapter is included as well.
Mfr. #IR-1203
Order # ONLY
50-13005 $30.49
Universal IR Target
Ultra sleek and compact IR target features remote
mounted electronics, allowing much greater flexibility
when hiding among equipment. It is fully compatible
with any Channel Vision IR distribution system and
terminal strip connection allows use with conventional
twisted pair cable. Mfr. #IR-2400
Order # ONLY
50-13015 $68.99
Wall Mount IR Target
Decora style target is
compatible with any Channel
Vision IR distribution
system. Terminal strip
connection allows use with
conventional twisted pair
cable, and decora style plate
is compatible with standard
wall plates. Attractive single
gang snap-on cover plate
attaches without hardware,
for a sleek low profile look. Mfr. #IR-2005.
Order # ONLY
50-13010 $70.99
IR Over Coax
System Components
Individual IR engine components are useful when
installing a custom IR system in an old-work or retrofit
installation. The IR coax engine includes the necessary
AC adapter and features a 3.5mm female connector, for
use with any Channel Vision IR emitter, allowing it to
receive IR commands via the existing RG59/U or RG6/U
coax. The IR target includes the matching coax engine,
allowing the IR signal to be inserted into the RG59/U
or RG6/U coax. Both items are sold separately.
Order # Mfr. # Description ONLY
50-13029 IR-4000 IR Coax Engine $27.99
50-13035 IR-4101 IR Coax Target 39.99
#50-13029
#50-13035
Complete IR Over Coax System
In old-work and retrofit installations, the simplest
method of sending IR remote control operation to
another room, is over the coax cable already in use.
This complete IR coax engine system will allow just
that. The kit includes an IR coax engine, with power
supply, a dual head IR emitter, and plasma proof IR
target. Components connect in-line with existing
RG59/U or RG6/U cable, with no effect on cable
system performance. Note: Any splitters in the signal
path between components must be DC passive.
Mfr. #IR-4500
Order # ONLY
50-13045 $76.99
Keystone Mount
DC Power
Connection
This keystone insert
features a standard
barrel jack which
accepts connection
from most AC adapters. It is essential when low
voltage must be inserted into a Cat 5 pair for remote
distribution. It is ideal for remote powering of small
LCD monitors, video cameras, IR repeater systems and
similar items. Rear mounted IDC connector allows
simple, fast connection to unterminated 22~24AWG
solid or stranded wire. Maximum voltage: 24VAC/DC,
1A. Barrel size: 2.1mm I.D., 5.5mm O.D.
•Sold individually
Order # MSRP ONLY
50-7752 $11.95 $8.07
Keystone Mount
3.5mm Connector
This keystone insert
features a standard
3.5mm three-
conductor female jack
which may be used in
two or three conductor applications. It is ideal any
time a 3.5mm connector is needed at a wall plate. Rear
mounted IDC connector allows simple, fast connection
to unterminated Cat 5 cable, or any 22~24AWG solid
or stranded, UTP or shielded wire. Maximum voltage:
24VAC/DC, 1A. Applications: •Remote location of
headphone jacks •Remote microphone connections
•Remote input from PC sound card, MP3 player or
iPod™ •IR repeater connection •Remote triggering
of A/V components •Low voltage DC connection
•Sold individually
Order # MSRP ONLY
50-7753 $12.95 $8.37
Bypass Cable
Use with channel Vision coax IR engine products to
bypass amplified couplers and other devices that do
not pass DC. Must be used with IR-4000 and IR-4100
couplers, sold separately. Mfr. #IR-4180
Order # ONLY
50-13039 $6.76
Universal IR Emitters
Compact IR emitters
utilize 3.5mm male plugs for
compatibility with all Channel Vision IR
distribution systems, and most others.
Units include adhesive mounting tape,
allowing simple installation on the
face of most equipment. Single head
unit operates one device and includes 6'
of attached cable. Dual head unit operates two devices
simultaneously and includes 12' of attached cable.
Order # Mfr. # Type ONLY
50-13019 IR-3001 Single head $5.04
50-13025 IR-3002 Dual head 8.68
#50-13025
NEW!
NEW!
NEW!
All-In-One
Complete
IR System
Complete IR
system includes an
IR target, four-output
distribution hub and
four emitters, everything needed
for complete IR remote control. It is perfect for use
with wall mounted LCD or plasma displays, or in
entertainment centers where components are located
inside the cabinet. IR target cord length, 36", IR emitter
cord length, 72". Kit includes mounting brackets,
adhesive tape and AC adapter. Mfr. #IR-5000
Order # ONLY
50-13049 $83.99
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!