PT-688CU CD PLAYER PT - 688CU CD PLAYER POWER PHONES ENCODING www.pyleaudio.
Precautions Thank you for purchasing this HI-FI product. Taking time to read these operating instructions carefully before use will Do not remove the case and bottom panel acquaint you fully with all its features and help ensure optimum Any inspections or adjustments inside the unit may lead to performance. malfunctions and electric shocks. Do not touch any of the In order to simplify the explanation illustrations may sometimes inside parts. differ from the originals.
Front Panel and Remote Control Information 1 13 12 11 PT -688C U C D PLAYER P O WE R P HONE S EN CODING 2 3 2 4 5 6 7 8 9 USB 10
Front Panel Information 1. Power Press this button to power on/off this unit. 2. Phones - This is the jack for headphones. Connect the plug on the stereo headphones for private listening. - Adjust the volume so that it does not hurt your ears when using the headphones. - If you do not intend to use your headphones, always ensure that you unplug them. 3. / Press this button once to stop disc playback. Press it again to open the disc tray and third press to close it. 4. Fast motion reverse playback. 5.
Remote Control Information 1. CD Standby When this unit is powered his buttoon, press tn to turn this unit into standby mode, press it again to power on this unit. 2. CD Display/USB Press once to displays the current playing time and the remained time. When there is disc inside the CD tray, press and hold this button for 2~3 seconds to switch to USB playback. Press and hold again to switch back to CD playback.
Rear Panel Information 1. Optical jack 2. Jack connections (Stereo analogue) 3. Power cable Operating Procedures AUDIO L AMP R CD LINE OUT L CD R Operating procedure 1. Power on the Amplifier. 2. Select “CD” from function selection column at the Amplifier, relative light will be seen when selected. 3. Power on the CD player by pressing POWER button. 4. Press the OPEN/CLOSE button. The disc tray will slide out. When it has opened fully, place a compact disc carefully in the tray.
Specifications Output voltage 2 Vrms (0 dB) Freq. Response 20 to 20 KHz +3dB-- -3dB Sin ratio (FLAT) (IHF-A) 75 dB (1 KHz) 90 dB (1 KHz) Channel separation 58 dB (1 KHz) Channel balance 0.5 dB (1 KHz) Distortion (-10dB) 0.08% (1 KHz) Power consumption 8W Dimension 430 (W) x 225 (D) x 71 (H) mm / 16.93” x 8.86” x 2.8” inches Weight 3.
