Cassette Player User Manual

ManualsBrandsPYLE Audio ManualsCassette PlayerPT-659DU

OPERATING PROCEDURES

4 5

1. POWER CORD

Plug this cord into a power socket before powering on

the unit. If not using the unit for prolonged periods of

time, please remember to turn it off and remove the

cord from the socket.

2. USB PORT

Use the included USB cable to connect this port to an

available USB port on your computer when

transferring tapes.

3. GAIN KNOB

This knob can be used to adjust the audio signal from

the unit to your computer. If you experience distortion

and clipping when recording to your computer, we

recommend turning down the Gain. If the audio level

from the unit is extremely low when recording to your

computer, we recommend turning up the Gain.

4. REC INPUT

Connect a stereo RCA cable from an external source to

this input. Please note that recording and dubbing only

works on deck B.

5. PLAY OUTPUT

This is the combined audio output from deck A and

deck B. Connect a stereo RCA cable from this output

to the Line or Auxiliary input of a home stereo receiver

system.

PLAYBACK INSTRUCTIONS

PLAYING BACK A RECORDED TAPE:

1. Press the [STOP/EJECT] button to open the

cassette holder.

2. Insert the tape and close the holder. If playing a

Cr02 tape, press the Cr02 button.

3. If connected to an amplifier system, make sure the

amplifier is turned on and adjust its volume to a

suitable listening level.

4. Press the [PLAY] button to play the tape.

Please note: If you are transferring tapes to your

computer, it is possible to hear your tapes through your

computer’s soundcard or built-in speakers while

transferring.

FAST FORWARDING AND REWINDING:

1. While the deck is stopped, press the [FAST

FORWARD] or [REWIND] button.

2. When the tape reaches the desired location, press

[STOP/EJECT].

3. Press the [PLAY] button to play the tape from this

location.

PAUSING:

1. Press the [PAUSE] button to pause the tape.

2. Press [PAUSE] again to release and resume

playback.

STOPPING AND EJECTING:

1. Press the [STOP/EJECT] button while the tape is

playing to stop playback.

2. Press [STOP/EJECT] again to eject the tape.