User's Manual

How to create Waypoints or a path in the PC
Note: You should have GPS Master installed in the PC first. See the
GPS Master installation and user’s manual for details.
 Run GPS Master
 Activate the Path Manager ( Path-->Path Manager)
 Click NEW on the Current Path
 Locate the desired position in the embedded Google Maps
(GMAP) and left click the mouse button. A new waypoint is just
created. It is assigned with a default name. If you want to change
this name, double click the waypoint place mark. A dialogue box
will appear. You can input a meaningful name there. The name of
waypoints is limited to 10 characters long.
 Add as many points as you want. Waypoints are linked
sequentially.
 Click Save Path as you finish adding waypoints. They will save
into the Current Path table.
 Clip the watch and plug in the USB cable. Then Click the “PC-
>Watch” button in GPS Master. Path(s) in the Current Path table
will be transferred to the watch in seconds.
How to Start/Stop Workout session and Take Laps while
navigating
 Press [S/S] to Start Workout. Push [S/S] again to Stop Workout
 Press [L/R] to take Lap
F. Navigation Function
05F-
Navigation