User's Manual

F. Navigation Function
- 01F
Navigation mode has 2 screens: Navigation and Goto screen. Navigation screen gives you all the information
you need when you are navigating to a waypoint. Goto screen allows you to pick a waypoint from the current
path.
Introduction
GPS watch is able to keep 10 paths simultaneously. But you can work on a single path at a time. This is known
as the current path. To select the current path: Menu > Navigation > SelPath. Each path has a maximum of
99 waypoints. Waypoints, in a path, may or may not have relationship with each other. If they have no
relationship, this path is just a collection of scattered waypoints. Waypoints can be linked sequentially to form
a route. You can navigate up or down a linked path until the first or last waypoint has been reached. Select you
navigation mode before navigation
Navigation modes
There are 3 navigation modes: Waypoint, Forward, and Backward modes. To pick your desired mode with
this key sequence – Menu > Navigation > Nav Mode.
Waypoint mode
The active waypoint is the destination. Select this mode if you want to go to the individual waypoints in the
current path. Then, pick the active waypoint on the Goto screen. This active waypoint is actually the
destination.
Forward mode
The last waypoint is the destination. Select this mode if you want to navigate from the first waypoint to the
last one in current path. Pick the nearest waypoint as the active waypoint on the Goto screen before you start.
If the active waypoint is reached, it will navigate to the next waypoint in the path. This repeats until the
destination (last waypoint) is reached.