User's Manual

E. Workout Mode - Application example - Backward tracking
06E-
A typical application for this is backward tracking. If you are going to explore the wilderness without planning and
want to return on the same path, you may:
- Set LBD to, say 200 meters, and turn it ON: Menu> Workout> SmartLap>ByDist>[ON, 200].
Remember that the maximum number of waypoints for a path is limited to 99. Set minimum LBD distance
accordingly and yet it will not exceed the limit. Waypoints beyond the path limit are ignored.
- Set L2WP path to Path9, and turn it ON: Menu> Workout>SmartLap> " Lap->WP" > [ON, Path9]
- Start Workout/Navigation trip: Navigation [S/S]
- If you want to stop and return, then press [S/S] to stop and hold [L/R] to reset and then you are ready to return
on the same path.
- Turn OFF L2WP: Menu> Workout> SmartLap> "Lap->WP”> [OFF]
- Select Path9 as the current path for navigation. Menu> Navigation> SelPath> Path9
- Set navigation mode to backward. Menu> Navigation> NavMode>Backward
- On the Navigation-Goto screen, select the last waypoint of Path9 as the current waypoint
- Start Navigation, follow the Heading Pointer. The watch will guide you from the last waypoint to the starting
point precisely.