Instruction Manual

• Press the C button to reset the seconds to zero.
Confirm your selection with t
he A button, the
minutes blink.
Note: You can use the fast forward function in the sellings by
pressing and holding the
C button.
• Set the minutes with the
C button. Confirm with
the A bulton. Set the hours, yea
r, month, day,
yea
r, month and day of birth, weight and size as described
above. Now press the
0 button, all settings a re saved.
Second Time
...
-.
2DDB
TH 508 "
...
-
~'---_/~
...
-
HEIGHT
118C~1
'----' ~'-- - -'
Keep the C button pressed for about 3 seconds, the heart
rate monitor watch changes
to the second time (T2 appears
on the bottom right of the display).
The setting
of the second ti me works as described in secti on
"setting the time ". N ow press the 0 button, all settings are
saved.
Keep the C button pressed for about 3 seconds to return to
the normal time (T1 appears on the bottom right
of the
display).
Note: Start the setting procedure again to
correct any wrong
settings.
Afarm
Press the C button in t he time mode
until ALARM is displayed.
Setting the Al arm
...
ALARM
• Keep the A button pressed for about 3 seconds,
"
SE TIING " appears on the display and minutes blink.
Set the minutes with the C button. Confirm your
se lection with the A bulton, the hours blink.
• Set t
he hours with the C button.
Confirm with the A button, the month blinks.
• Set the month with the C button. Settings of 1, 2,
3,
.. 11 , 12 and •• are possible. If you choose - , t he
alarm sounds every month (on the set day · see the next
section,
~ setting the day"). Confirm wi th the A
bulton, the day
bl inks.
•
Se t the day with th e C button. Sellings of 1, 2,
3, 30,
31 and •• are possible. If you choose " , the alarm
sounds every day. Confirm with the A button, the
button CHIME (hourly alarm) b
li nks.
•
You can now set th e hourly alarm to ON or OFF with the
C bu
tt on.
.".
-
CHIME
OFF
_.
\
CHIME
ON
•