Printer User Manual

Part 6

QUICK START-UP

LOADING PAPER

Desk Top Application

1. Slide the hood lock toward the front of the

printer to release the hood as in Pix. 1.

2. Raise the released hood

wide open manually as in

Pix. 2.

3. Drop the thermal paper roll

inside the printer in

orientation as shown in Pix. 2.

4. Close the hood back leaving

the tail of the paper roll

coming out of the opening

between the hood and the top

cover as in Pix. 3. Tear off excessive paper.

When to Replace Paper

Whenever the printer gives paper out signal or a red line appears on

the thermal paper, it is the proper timing for replacing the paper. Do not wait

till the print engine is dragging the paper roll at the very end. Remove the

leftover and replace a new paper roll as illustrated above to prevent excessive

paper dust in the printer and consequently possibility for paper jam.

CONNECTING CABLES

Connection Area Pictures

Serial Connection

All the external connectors are in the recessed area at the rear bottom

for PP-7000II. The serial connector is a 9-PIN D sub Female connector at the

7000

Pix. 2

Release Button

Pix. 1

Pix. 3