User's Manual
6
3.1 NO POWER 
1. Make sure the power cable has been pluged in. 
2. Make sure the plug has 12V~14V, may use another electrical appliance 
to test it. 
3.2 NO FUNCTION OF REMOTE CONTROL 
1. Make sure the batteries are in good condition and installed properly. 
2. Make sure the remote control is aiming at the receiver, and there are no 
obstacles in between. 
3. Perhaps, it is too far away from the receiver. Normal distance is within 7 
meters. 
3.2 NO DISPLAY OR NOT CLEAR 
1. Check the video signal wires if they are connected properly. 
2. Check the antenna or adjust it. 
3. Make sure the TV/Video being in proper position. 
4. ACCESSORIES 
 PS2/CAR CABLE 
 INSTALLATION BRACKET 
 USER MANUAL 
 SCREW PACK 
 REMOTE CONTROL 
5. SPECIFICATIONS 







