INSTRUCTION MANUAL IN DASH COLOR TT-LCD MONITOR PLVS420 ME NU 4 INCH SUN VISOR TFT-LCD MONITOR
Thanks for purchasing PYLE Sun visor TFT-LCD Monitor. Please read this menu carefully before the installation.
OPERATION 1.Connect the monitor power input plug to a DC power source (Red plug +12 VDC, Black plug(-) to ground). 2.Connect the external video source output signal (from VCD, DVD, TV etc.) To the VIDEO in jack. 3.Press power button to turn the monitor on and off. The backlight for the button will turn brighter. 4.Press the menu button to activate the picture display characteristics adjustment. 5.Press the + button to increase the selected adjustment level or press the - button to decrease the level. 6.
INSTALLATION MENU Installation will vary from vehicle to vehicle, as headrests in vehicles are not standard.
PRECAUTION To prevent short-circuiting of the electrical system and cause serious damage to the unit or the vehicle, you are advised to f o l l o w t h e i n s t r u c t i o n s c a r e f u l l y. Should there be requirement to replace blown fuse, do remember to disconnect all power supply and switch the unit before replacing it with a new one. Use only correct rating fuse to avoid damaging the unit.
FRONT PANEL 1.power indicator 2.power On/Off MEN U 1 2 3 4 5 6 7 8 9 3.menu 4.positive adjustment 5.negative adjustment 6.menu select up 7.menu select down 8.IR 9.video input REMOTE CONTROL 1.menu 2.power on/off 3.game 4.game + 1 5.volume 3 6.volume + 5 7.sleep 8.game 7 9.mute switch 10 10.display mode 11.image up/down/left/right reverse 12.
Technical Specification Screen size: 4 inch(Diagonal length) System: PAL & NTSC Display Method: TFT active matrix system Resolution: 390x282 dots Power supply: DC 12V Power consumption: 8W Dimension: 210 X 129 X 30 mm WIRING MENU Black:power input Yellow:video 1 input
