PLD53MUT OWNER'S MANUAL Mobile Video System Motorized Slide Down Panel 2.5 Inch TFT Color Monitor Car DVD/VCD/CD/MP3 Player/TV Tuner AM/FM Digital Pll Tuning Radio MPEG4 Player USB Connect Remote Control www.pyleaudio.
CONTENTS Safety Information...................................................................................... 2 Disc Notes ................................................................................................. 3 Installation ................................................................................................. 4 Change Angle .............................................................................................6 Electric Connection ............................................
SAFETY INFORMATION CAUTION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player VIDEO MP CD-RW 3 unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
INSTALLATION NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER CONSOLE PLAIN WASHER SLIDE BRACKET HOUSING TAPPING SCREW HEX BOLT KEY PLATE PLASTIC COVER KEY PLATE If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
CHAGNE ANGLE CHANGING THE CONTROL PANEL ANGLE When you want to change the angle to play, you can press repeatedly the (angle)button to select the desired angle as follows: Angle 1 Angle 2 Angle 4 Angle 3 Caution: Do not insert your finger behind the control panel 6
ELECTRIC CONNECTION WIRING CONNECTION MAIN UNIT WHITE GREEN TV ANT IN YELLOW AUX(optional) ANTENNA CONNECTOR RCA CABLE IGNITION SWITCH(B+) RED REAR RCA OUTPUT CABLE (optional) MEMORY YELLOW CHOKE BOX BACK-UP(B+) GROUND(B-) FRONT RCA OUTPUT CABLE BLACK (B+)12V REAR CAMERA SWITCH (B-)PARKING BRAKE REAR CAMERA INPUT VIDEO IN YELLOW RCH IN RED LCH IN WHITE GREY SUBWOOFER VIDEO OUT 2 YELLOW COAXIAL OUT BROWN RCH RED LCH WHITE FRONT RCA RED R VIDEO OUT 1 YELLOW FRONT RCA WHITE L (FOR RCA LINE OUT VER
REMOTE CONTROL 15 16 3 17 7 2 19 20 21 22 6 14 5 1 13 23 9 24 18 12 25 11 10 26 4 8 1.CLK 2.MODE 3.STOP 4.SETUP 5.MO/ST(AUDIO) 6. SUBTITLE LO/DX 7.REPEAT 8.GOTO 9. / 10.SEL 11. VOL+/VOL12. / / / 13.MENU SUB WOOFER 14.BAND(OSD) 15.POWER 16.PLAY/PAUSE 17.MUTE 18.TITLE/PBC (A/P) 19. 20.ANGLE 21.EQ 22.SEARCH 23.ENTER 24.SKIP 25. 0 - 9 26.+10 Press it to change the display to clock display. Press it to change between TV, RADIO ,DISC and AUX IN mode. Press it to stop playback.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
BASIC OPERATION 14 19 12 13 21 17 4 6 7 23 8 SEL 18 1 5 16 15 20 3 2 22 11 10 9 25 24 1.PWR BUTTON Press it to turn on the unit. Press it again to turn off. 2-3.VOL+/VOL- & SEL BUTTON Press sel button repeatedly to change mode through volume, bass, treble, balance, fader, color, bright, contrast and tint modes. Face up or down swing the SEL knob VOL + /VOL- to adjust the selected mode. (The corresponding value will show on the display.
BASIC OPERATION B. To recall the preset memory, press one of the preset buttons [1-6]. C.Press 1/TOP(6) button to select the first track/chapter to play. a.In the state of VCD/CD/MP3 disc playing, press the button on the front panel to select the first track/chapter to play.(depend on the disc used for VCD) b.In the state of DVD disc playing, the 1TOP button is not available. D.Long Press 2/RPT(7) button to select repeat mode as follow.
BASIC OPERATION 12.AS/PS BUTTON When shortly pressing the APS button on the front panel or the A/P button on the remote controller, the radio searches for each preset station. When the field Strength level is more than the threshold level of stop level, the radio is holding at that preset number for few seconds with releasing mute, and then searches again.
BASIC OPERATION 20.ST BUTTON Press ST button to select STEREO or MONO reception for radio stations. 21.MENU BUTTON Press it to display the root menu of the DVD/VCD(Only when PBC not in use) disc. 22.RESET BUTTON RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C.
BASIC OPERATION TFT MONITOR OPERATION 1. Press the SEL button(3) repeatedly during DVD/VCD mode to display the adjustment items on the screen(24). and then face up or down swing the VOL+/- buttons to adjust the selected item. (The corresponding value will show on the display.) Volume Bass Tint Treble Contrast Balance Bright Fader Color 2.ADJUSTABLE ITEMS: COLOR: 0 to 32 Adjust the color fo the picture-lighter or darker. BRIGHT: 0 to 32 Adjust if the picture is too bright or too dark.
BASIC OPERATION USB Operation On-Screen Display Function A.Plug the USB connect line to the USB socket (see number 25) of the unit properly,(See fig.1) when the USB appliance connect to the USB port of the connect line, the system star playing track of the USB appliance automatically. B. IN USB playing , you can press the cursor button to select the item.Then press ENTER button to playing. also press numeric to play the corresponding track directly.
BASIC OPERATION Notes: - The language number is different according to the disc. - Some discs only contain one subtitle language. - When no different subtitle language are recorded, will be displayed at screen left top corner. e.Press OSD for the fifth time: The message on the screen will be cleared for SVCD and VCD. C.
SETUP GENERAL SETUP --- GENERAL PAGE --DOLBY DOLBY -----General setup page---- -----General setup page---TV Display LB TV Display Normal/PS Angle Mark ON Angle Mark Normal/LB OSD Lang ENG OSD Lang Wide Spdif Output SPDIF/RAW Spdif Output Captions ON Captions Screen Saver ON Screen Saver Last Memory ON Last Memory Set TV Display Mode Go To General Setup Page TV Screen 1. Press SETUP button on the remote control . 2.The SETUP menu is displayed. 3.
SETUP DOLBY DOLBY -----General setup page---- -----General setup page---- TV Display TV Display Angle Mark ON Angle Mark OSD Lang OFF Osd Lang Spdif Output Spdif Output Captions Captions Screen Saver Screen Saver Last Memory Last Memory SPDIF OFF SPDIF/RAW SPDIF/PCM Set Angle Mark Setup SPDIF 2. ANGLE MARK DISPLAY SETUP If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear. 4.
SETUP SPEAKER SETUP DOLBY --- SPEAKER SETUP PAGE --DOLBY -----General setup page---TV Display -----Speaker Setup Page---- Angle Mark OSDLang DOWNMIX Spdif Output LT/RT STEREO Captions Screen Saver ON Last Memory OFF Set Downmix Mode Screen Saver This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output.
SETUP PREFERENCES SETUP --- PREFERENCES PAGE --DOLBY DOLBY -----Preference Page---- -----Preference Page---- TV Type PAL TV Type Audio AUTO Audio French Subtitle NTSC Subtitle Spanish Disc Menu Disc Menu German Parental Parental Password Password Default Default This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.Select PAL format, when you connected to PAL TV.
SETUP DOLBY DOLBY -----Preference Page---- -----Preference Page---- TV Type 1KID SAF TV Type Audio 2G Audio 3PG Subtitle 4PG13 Disc Menu 5PGR Parental Subtitle Disc Menu Parental Password Default 6R Password 7NC 17 Default RESET 8 ADULT OFF Load Fcatory Setting 7.DEFAULTS Set Parental Control Select reset to become factory initial setting. 5.PARENTAL Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.
SPECIFICATION GENERAL Supply Voltage Current Consumption SIGNAL SYSTEM : 12v Dc (11v-15v) : More Then 10 A : Compositive Video 1.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
