User's Manual

BASIC OPERATION

13. MOD BUTTON

Press it repeatedly to select TV, AUX IN , RADIO and DISC mode.

During the USB playback, you can press STOP button and then press GOTO

button to select the DISC mode.

14. (EJECT) BUTTON

Press this button to insert and eject the Disc . The operating unit swings down-

wards. Insert the Disc with the labelled side facing upwards gently into the CD

slot until the device draws in the CD/DVD automatically. The operating unit will

automatically swings back to the normal position.

16. RET(RESET) BUTTON

RESET button is placed on the housing and must be activated with either a

ballpoint pen or thin metal object. The RESET button is to be activated for the

following reasons:

A. Initial installation of the unit when all wiring is completed.

B. All the function buttons do not operate.

C. Error symbol on the display.

15.MENU BUTTON

Press it to display the root menu of the DVD/VCD(Only when PBC not in use) disc.

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

b) In Radio Mode:

Move the SEL button in the direction of or in order to set a radio station

manually. Keep the SEL taste pressed down in the or direction in order to

start the search for a radio station automatically.

12. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)

a) In DISC, USB mode:

if you wish to jump forwards or backwards press the SEL button (4) briefly in

the or direction. (Note: in DVD mode, press the SEL button continually

twice in direction to skip back one track during playback.)

Note:For some VCD 2.0 dics(PBC-playback control), and buttons may

be unavailable.

To wind through the tracks keep the SEL button pressed in the or direction

for about 2 seconds. FF X2 appears in the display. Operating the SEL button

again, the speed of rapid forward/reverse changes according to the disc

as follow:

17. IR (infrared)

Sensor for the remote control.

18. AUX IN SOCKET

he operation of the AUX , please see page 15.