- Pyle CD Player Owner's Manual

Follow this easy wiring diagram in order to enable you to install
the new or existing RADIO and SPEAKER wring system.
Be sure the unit is connected to a 12 volts battery with negative ground.
Good ground connections eliminate most electrical noise problem and
require tight with the metal vehicle chassis. remove plastic, paint or dust
for good electrical contact.
SPEAKER WIRING
Theunitisonlydesignedfortheusewith4speakerssystem,itcan
only be connected with speakers rated in the load impedance range
from 4 to 8 ohms. Load impedance less than 4 ohms could damage
the unit.
Never combine (BRIDGE) the outputs for use with 2 speakers, and
Never ground any Negative speaker to the chassis ground.
10
CAR ANTENNA
RED RCH
WHITE LCH
RCA line outRCA line out
Green
Grey
Green
/white
Grey
/white
LeftFront
RightFront
Brown Blue
Brown
/white
Blue
/white
LeftRear
RightRear
RED RCH
WHITE LCH
RCA line outRCA line out
Connect to control for antenna
or remote control for amplifier.
Orange
Connect to battery or +12 volts of
power source that is always live.
Black
Ground-
Red
12V+
Connect to lgnition key switch.
CAR ANTENNA
Memory+
YELLOW