User manual

18
Insert the assembled
main support bars (from
Step 2) into the T-shape
locks on the assembled
floor bars (from Step 1).
Adjust as necessary to
make sure that the main
support bars are
perpendicular to the
floor bars.
With the chair that you will be
using, you should sit on the
chair and adjust the heights of
the T-shape connectors
according to your chest and
knee heights. The lower T-
shape connectors on the main
support bars should match the
height of your knees, while the
upper T-shape connectors on
the main bars should match
that of your chest.
Step 3
NOTE