Operating Guide

Hollow

Bulge

-5-

2) Attaching the control panel onto the chassis;

(1) Insert the left side of the control panel into the hollow of the chassis .

(NOTE : the “bulge” point on the control panel must be attached into the hollow

of the chassis .)

(2) Gently

push the right side of the control panel till you feel a “ Click” .

3) Testing it for making sure that it can work properly .

4. Installing chassis according to the installation diagram on next page:

1) Insert the chassis of the car multi-media system into

the Sliding Bracket Housing.

2) Use the metal strap to fix the rear part of chassis.

* Uninstalling the chassis:

1) Remove the metal strap from the chassis ;

2) Remove the control panel from the chassis;

3) Remove the plastic frame from the chassis;

4) Insert 2 key plates into the

left and right sides of the chassis and draw the chassis

out of the sliding bracket housing.