Operating Guide

External iPod operation
An external iPod can use the car AV system as a monitor and amplifier.
1. Use the iPod cable to make the car AV system and the external iPod connected
through the AUX IN jack on control panel of the car AV system and the headphone
port of the external iPod.
2. Play the external iPod, then use MODE button to enter AUX IN mode for the car AV
system. By now, the program played by the external iPod can be output through the
monitor of the car AV system
and the speakers connected to the car AV system.
* The icons on the AUX interface descript as follows:
and icons = VOL- and VOL+ buttons = VOL knob
MUTE icon = MUTE button
EQ icon = EQ button
LOUD icon = long pressing LOUD button
SWF icon = long pressing SW button
AUX icon: To enter source menu
MENU icon : To pop up the page1 of SETTINGS MENU
MAP icon : To enter GPS mode but not exit iPod mode
3. In AUX IN mode, you can use SEL, +, -, VOL, MUTE, EQ , SW and LOUD buttons
or icons to adjust audio and video.
pn
oHeadhoeprt
-38-