Operating Guide

AUX IN operation
An external AV system can use the car AV system as monitor and amplifier.
1. Use an AV cable to make the car AV system and the external AV system connected
through the AUX IN jack on control panel of the car AV system and the
AV Out jacks
of the external AV system.
2. Play the external AV system, then use MODE button or Source Menu to enter AUX
IN mode for the car AV system. By now, the program played by the external AV
system can be output
through the monitor of the car AV system and the speakers
connected to the car AV system.
* The icons on the AUX interface descript as follows:
and icons = VOL- and VOL+ buttons = VOL knob
MUTE icon = MUTE button
EQ icon = EQ button
LOUD icon = long pressing LOUD button
SWF icon = long pressing SW button
AUX icon: To enter source menu
MENU icon : To pop up the page1 of SETTINGS MENU
MAP icon : To enter GPS mode but not exit AUX mode
3. In AUX IN mode, you can use SEL, +, -, VOL, MUTE, EQ , SW and LOUD buttons
or icons to adjust audio and video.
-37-
AUX IN JACK
MOD
VIDEO IN (yellow)
RCH IN (red)
LCH IN (white)