Operating Guide

Disc/USB/Card Operation
1. Loading or unloading a disc, USB or card
1.1 Loading a disc, USB or card
To play files in a disc, insert a disc with label surface up into disc slot. it will
automatically play.
* CAUTION OF USING
DISC
1) Handle a disc by its edge, do not touch the surface of play side.
2) Before inserting disc, wipe the disc outwards from the disc
center with a clean, soft, dry, lint-free cloth. Do not use solvents
/thinner such as petrol/benzine, cleaner.
3) After taking
a disc out of disc slot, put the disc inside disc case to
keep it clean.
4) Do not stick paper or tape on the disc surface of play side. If
there is glue (or analog) on the disc surface, must wipe it up
before using.
To play files in a USB, firstly open USB port cover, then insert USB storage into
USB port, and then it will play files in the USB automatically.
To play files in a card, firstly press REL button to detach
control panel, then hold
the right part of the control panel and pull upwards a little and to you to remove it,
and then insert the card with label side upward and contact end frontward into card
slot as the following fig., and then
attach control panel onto chassis again, by now
it will play files in the card automatically .
Label
surface up
-23-
Label side
facing upward
Press in till heard a “CLICK”