Operating Guide

-19-
It switches over to the AF for a short time, and the AF icon is light on screen(not
flash).
* In FM mode, when switching on AF mode, the radio auto searches for or preset
only those RDS stations.
* In FM
mode, when switching on AF and TA modes, the radio auto searches for
only those RDS stations broadcasting traffic announcement.
10. REGION mode
use the RDS interface of the SETTINGS MENU or the SEL and VOL buttons to set
REGION mode on or off.
In REGION on mode, when switching on AF mode, the radio can’t switch over to
those AF stations which have a different regional program content.
In REGION off mode, when switching on AF mode, the radio can switch over to
those AF
stations which have a different regional program content.
11. PI mode
use the RDS interface of the SETTINGS MENU or the SEL and VOL buttons to set
PI SOUND or PI MUTE mode.
In PI SOUND mode, when switching on AF mode, if a
car cruises that critical area
back and forth, an oscillation phenomenon can be occurred, because the different
PI code can be receive from a same AF. when the different PI sound (DIP) is heard
once in a while, the different PI sound will
be heard for less than 1 second.
In PI MUTE mode, when switching on AF mode and under above same situation,
a mute sound will be heard for less than 1 second.
12.
To automatically search for traffic announcements (TA)
In any mode, use the RDS interface of the SETTINGS MENU or SEL and VOL buttons
to set TA mode on or press TA/AF button on control panel or long press TA button on
remote control to switch on TA mode, then TA: ON will display on screen for a while
and begin to search for those RDS radio stations transmitting traffic announcement.
When an RDS radio station transmits traffic announcement and is received by the
radio, temporarily switch the current work source to an RDS radio station broad-
casting traffic announcement, and TRAFFIC will be displayed on screen.
When the traffic announcement is over,
it will return back to previous work source.