Operating Instructions

8
a) Turn on the camera
b) Press “UP” and “DOWN” to Select “DATE” menu
c) Press “OK” to confirm
d) Press “UP” and “DOWN” to select year number
e) Press “OK” to confirm and then it will come to set Month “MM”, Press “UP” and “DOWN” to
select.
f) Press “OK” to confirm and then it will come to set Date “DD”, Press “UP” and “DOWN” to select.
g) Press “OK” to confirm
h) Press “Setup” to QUIT or continue to the next menu item.
6.2.2 Set Time
Setting time before use, so that the user can have time information printed on the picture.
a) Turn on the camera
b) Press “UP” and “DOWN” to Select “TIME” menu
c) Press “OK” to confirm
d) Press “UP” and “DOWN” to select hour “HH”.
e) Press “OK” to confirm and then it will come to set minute, Press “UP” and “DOWN” to select the
minute “MM”.
f) Press “OK” to confirm
g) Press “Setup” to QUIT or continue to the next menu item.
6.2.3 Set Delay
Camera Delay is used to set the amount of preset time in minutes and seconds the camera will sleep
between PIR triggering. This setting ranges from 5 second ~ 10mins. Default delay is 1 minute.