Operating Instructions

6
Memory
Your Night vision camera Digital Scouting Camera has a memory card slot and can accept SD cards
with a max capacity of 32GB (SD card sold separately).
Inserting SD card
Make sure camera is in the OFF position whenever adding or removing memory.
• Insert SD memory card in to the SD Card Slot completely and in the correct direction as shown
by the sticker located at the side of the housing.
• To remove the SD memory card, depress the SD card and pull out the card gently.
▲ SD cards must be clean (no images from other sources), if you are using the SD card from other
cameras, please make sure to format the SD card prior to using in the camera. New cards can be
used straight from the package.
6. Setup Your Camera
6.1 Enter Camera Setting M ode
The setting of this camera is very easy. The word ”WAIT” will show on the display for 2-3 seconds,
then the camera will enter setup mode. Menu list as following：