Operating Instructions

17
 PIR Sensor LED Flashes/Doesn’t Flash
 When the camera is in the “Setup” mode, the PIR Indicator LED on the front of the camera will
flash when it senses motion. This is for setup purposes only and will help the user aim the
camera.
 During use, the LED will not flash when the camera takes an image. This is to help keep the
camera hidden from game.
 Camera won’t retain settings
 Make sure that you have been saving the changes to any parameter settings that you made
while in “Setup” mode, by pressing “OK” after changing the setting. If you don’t save your new
setting after changing it, the camera will continue to use the original default setting for that
parameter.
 Longitude & latitude imprint not be showed on images
 Make sure this trail camera is connecting or working together with the transmitting adaptor.
Longitude & Latitude will only be printed if the camera is connected to the transmitting
adaptor.