Operating Instructions

11
a) Turn on the camera
b) Press “UP” and “DOWN” to Select “DUTY” menu
c) Press “OK” to confirm
d) Next you will set the starting point in HH:MM.
e) Press “UP” and “DOWN” to select and press “OK” to confirm
f) First you will set the ending point in HH:MM.
g) Press “UP” and “DOWN” to select and press “OK” to confirm
h) Press “Setup” to QUIT or continue to the next menu item.
For Example:
07:30 -- -- 18:30 would define camera to work from 7:30AM to 6:30PM
20:15 –-- 04:20 would define camera to work from 8:15PM to 4:20AM the next day.
6.3 GSM Setting (After transmitting adaptor is connected)
▲ For how to connect and set the transmitting adaptor, please read the S2G00 User Manual.
MMS/GPRS functions are compatible on this camera. If the user selects these functions, the camera
display will show the following:
 Transmitting Adaptor’s LED indicator will be illuminated if it connects to camera successfully.
 After user completes set up of the camera, press “setup”, the camera will start to take images,
while the display will show the signal intensity “*H/M/L”.
 When the adaptor is transmitting images, the display will show “GSM” and countdown 15s .
Note:
 The camera display will show “2GNO” if connection is not made very well.
 The camera display will show “NOSI” if the SIM card is not inserted in the adaptor, or if the SIM
card is in poor condition and not making good contact.
7 Using the Camera
7.1 Mounting the Camera
It is recommended that you mount the camera 1.2~1.5 meters off the ground with the camera
pointed at a slight downward angle. Be sure to avoid mounting the camera facing east or west as the
rising and setting of the sun could produce false triggers and overexposed images. Clear branches
and other debris away from the front of the camera so as not to block the camera lens or PIR sensor.