Operating Instructions

10
f) Then it will show corresponding options for 1P 3P or Movie
g) If you select 1P or 3P, the camera will ask you to set the photo resolution HI (5M) or LO(3M)
h) If you select Movie, the camera will ask you to set the video length from 5s ~ 30s.
i) Press OK to confirm
j) Press “Setup” to QUIT or continue to the next menu item.
6.2.6 Set Status (PIR, Time-lapse)
In the menu, you are able to set the camera working status such as PIR activated or time-lapse mode.
We have three statuses.
1. PIR: This means the camera works on PIR activation only.
2. TL: This means the camera works on time-lapse mode only. Time-lapse means the camera takes
the picture on a certain interval of time. The interval range is from 1 minute to 24 hours.
Example: The time interval 20:15 means camera will capture a image every 20 hours and 15
minutes. 00:59 means camera will capture a photo every 59 minutes.
3. PIR+TL: This means the camera works on both PIR trigger and the time-lapse hybrid mode.
a) Turn on the camera
b) Press “UP” and “DOWN” to Select “STATUS” menu
c) Press “OK” to confirm
d) Press “UP” and “DOWN” to select “PIR”, “ TL” or “PIR+TL”
e) Press “OK” to confirm
f) If you select “TL” or “PIR+TL”, you are asked to set the interval from 1 minute to 24 hours. For
example, 1 minute means the camera will take the picture every 1 minute.
g) Press “OK” to confirm
h) Press “Setup’” to QUIT or continue to the next menu item.
6.2.7 Set Camera Duty Time
User can make the camera work in a specific time period of the day. if you only need camera work at
night, you can set camera work start from 19:00PM and end at morning 06:00AM. This will affect all
three status of PIR, TL or PIR+TL mode. We call this “duty time” mode. By system default, the
camera works 24 hours a day.