Water Resistant Infrared Night Vision Game Camera with Time Laps Function PHTCM38 www.pyleaudio.
Ⅰ. Your camera features 8MP images, 30 FPS videos, selectable interval, 30 IR LED’s (Note#1) with 50 foot maximum illumination, up to 32GB SD card capacity, adjustable PIR (Note#2) sensitivity for ambient temperature, photos are stamped with date, time, moon phase, and temperature. 1. Front Housing Image PIR Camera Lens 1R LED Illuminator Indicator Light Light Sensor 2.
. Switch and Button Control Panel 4.
Ⅱ. Battery Installation 1. Ensure power switch is in the off position. 2. Install 4AA batteries according to polarity indicated in the battery tray. ★ Recommended Alkaline battery ★nickel-hydrogen battery rechargeable never to be used (low voltage of nickelhydrogen battery would render the camera non-working ) ★Incorrect voltage or polarity (+/-) will get the battery hot and or damage unit. Ⅲ. SD Card Installation 1. Make sure SD Card is not write-locked before inserting. 2.
Ⅳ. Setup your Camera 1. After installing the batteries and SD card correctly, turn the power switch to the on position. Operation Screen Display FREE MEM Turn on the switch XXX MB Press “DOWN” skip or wait for 5s Press “DOWN” come to set menu or wait for 5s, come to shoot resting condition automatically IMG00000 MOV00000 SET DATE Or nothing 2.
Format FORMAT CARD SD FORMAT CARD SD Y/N ★during menu-setting, after 1 min if you do nothing, the camera would come into shoot resting condition automatically Ⅴ. Specification and Parameter Model PHTCM38 Image Sensor ◆CMOS Image Format Video Format Delay Time Memory Trigger Mode ◆5.0 MP / 8.
2. TV Interface ◆On menu setting, insert the TV cable and connect to TV, “TV OUT PREVIEW” showed on LCD, then the pictures from camera will appear on TV. ◆press “OK” to change to Playback mode, LCD showed “TV OUT PLAYBACK”, you can press “UP/LEFT” or “DOWN/RGHT” to view the pictures. ★Press “OK” to playback and view videos.
