Instruction Manual

The Total Altitude Displacement
1. To read the Total Altitude Displacement.
Press button A(UP)I B(DOWN) to
enter the Total Afiitude Displacment
Mode and then press button D(SET)
to select the total displacement for r-------,
the gain (TOT U) or the loss (TOT d ). 11IJl·· "'I
2. Press button A(UP)I B(DOWN) to I UI "I"
quit or left it return automatically to '-- ____ -'
Normal Mode within 2 minutes.
I~ ·· 0: I
o
-
A~==:-;-;-==~;::::==t2==::;1! limo Spend
o 1112 G
From O to G , (the gain TOT U)
Total altitude displacement for the gain (TOT
U) = d1 +d2+d3
From
G to e , (the loss TOT d)
Total altitude displacement for the loss (TOT d) = dS+d6+d7
-23-
The Altimeter Alarm
1. Press button A(U P)I B(DOWN) to
enter the Altimeter Alarm Mode.
2.
To set the target altitude, press
button D(SET) to turn Off/On the
Altimeter Alarm
(Fig. 6A & 68).
3. Hold button D(SET) until digit starts
to flicker
(Fig. 7).
4. Press button A(UP)I B(DOWN) to set
the digits and then press button
D(SET)
to confirm.
5. Repeat Step 4 to set your desire
digits
(Fig. 8).
6. After setting the target altitude, press
button D(SET) to activate
or
deactivate the alarm (Fig. 9) .
7. For the Altimeter Alarm sound, it will
• Beep
.. Beep .. Beep for 1 minutes
and the UP (
U ) icon flashing; when
the altitude come across the target
in ascending
(Fig. 10).
• Beep Beep .. Beep Beep .. Beep
Beep for 1 minutes and the DOWN
( d ) icon flashing; when the altitude
come across the target
in
descending (Fig. 11) .
8.
To read the target altitude and the
alarm setting, press button A(UP)/
B(DOWN) to the Afiimeter Alarm
mode and then press button
A(UP)/
B(DOWN) to quit
or left it
return automatically to Normal Mode
within 2 minutes.
-24-
(Fig. 6A)
" I /
fRl - OFF -
I
(Fig. 68)
(Fig. 7 )
(Fig. 8)
" I r:, "
Ir1 003 5-
•
(Fig. 9)
(Fig. 10)
, ,
- ..
1m
38 '
(Fig. 11)
I
33 - '+t