Instruction Manual

Maxlmun and Minimum
1. Press button A( UP )! B(DOWN) to
enter the Barometer Memory mode.
2. The memory of maximum and
minumim barometer will be scrolled
on the display
au tomatically.
3.
To reset the memory, press and
ho ld button D(SET).
••
...
fllI In '~6 "
IU I .....
.. . 6
fllI
90aD :
••
...
n
---- - ..
. ..
The Atmospheric Pressure Bar Chart
1. Press button A( UP )! B(DOWN) to
enter the Bar Chart mode.
2. The atmospheric pressure chart
records the atmospheric changes
for the past 12 hours and it wi
ll be ••
scrolled on the display automatically. [] : 051.5 :
• The history hours are:
0= Current
-1
= Past 1 hour
-2 = Past 2 hours
-3 = Past 3 hours
·6
= Past 6 hours
-12
= Past 12 hours
3.
To reset the records, press and ho ld
button D(SET).
-19-
• •
[] ---- - ....
THE ALTIMETER
Press button C(MODE) to enter the Altimeter Mode.
Setting the Altitude
1. To keep a check and re-adjust the
alt
im eter, it wi ll lead to the most
accurate reading.
2. Ho
ld button D( SET) to enter
Altimeter setting, the altimeter digits
wi
II start to II icker.
3. Press button A
(U P )/ B(DOWN) to
set and then p
re ss button D(SET) to
confirm.
4. Repeat Step 3 to set your desire
digits.
Zeroing the Altitude
(Sea-level)
1. To·resetting the height at sea·level,
to set a
ll digits are zero.
Temperature and Relative Humidity
1. A bui ld ·in sensor measure
temperature and humidity and
shows on the display.
-20-
~ ... H5
-10
30 "
(If{[