CD MP3 Player Owner's Manual

- 3 -

POWER

1. Disc Tray

The disc is placed on this tray. Pressing the disc tray open/close

buttons

will open or close the tray.

2. START/PAUSE

This connector is used for fader start; connect it to a mixer, and

remote control the “START/PAUSE” by moving the fader of mixer

3. DIGITAL OUT

The digital from each CD player is output from these jacks.

Connect to the line input of the D/A Amplifier

4. LINE OUT (Output Jacks)

The audio from each CD player is output from these jacks.

Connect to the line input of the mixer.

. CONNECTOR PORTS

The 8-pin termination permits the connection of the main

6. EJECT BUTTON

Press to eject the disc.

NOTE: Disc won’t be ejected unless stop or pause

button has been push first.

7. POWER (Power Switch)

Press the power switch to turn the unit on, and the LED

indicator will be light. To switch the POWER off by pressing

the POWER switch again

8. AC INPUT

Connecting this power cord into an AC wall outlet with

the proper AC voltage.

9. TACT / LOCK / CUE PLAY option

Select the type of switch in the mixer for FADERSTART

wire remote control.

unit to the control unit 1.