PDCD940MP PROFESSIONAL DUAL CD MP3 PLAYER WITH SEAMLESS LOOP & SOUND EFFECT
TABLE OF CONTENTS NOTE ON USE …………………………………………………………………2 FOR SAFE AND EFFICIENT OPERATION ………………………2 DESCRIPTION OF THE FUNCTIONS ……………………………3 FUNCTION OF THE MAIN UNIT………………………………………3 FUNCTION OF THE CONTROL UNIT…………………………………4 LCD INSTRUCTION …………………………………………………6 PARAMETER SETTING INSTRUCTION ……………………………7 CONNETIONS ………………………………………………………9 BASIC OPERATION ………………………………………………10 LOADING AND EJECTING THE DISC………………………………10 TRACK SKIP ………………………………………………………10 ANTI SHOCK MEMORY ……………………………………………11 MATCHING THE BEA
NOTE ON USE BE CAREFUL OF HIGH TEMPERA- TO AVOID DUST & MOISTURE TO TURE AVOID PLACING ON UN- DO NOT USE CHEMICALS STABLE LOCATION IF OUT OF WORK, CONTACT KEEP SALES AGENCY IMMEDIATELY MAGNETISM AWAY FROM TV & DO NOT OPEN THE CASE CARE WITH THE POWER CORD This product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
POWER 1. Disc Tray The disc is placed on this tray. Pressing the disc tray open/close buttons e will open or close the tray. 2. START/PAUSE This connector is used for fader start; connect it to a mixer, and remote control the “START/PAUSE” by moving the fader of mixer 3. DIGITAL OUT The digital from each CD player is output from these jacks. Connect to the line input of the D/A Amplifier 6. EJECT BUTTON Press to eject the disc. NOTE: Disc won’t be ejected unless stop or pause button has been push first.
Function of the Control Unit Bu 1. EJECT BUTTON Press to eject the disc. Note: Disc can’t be ejected unless the stop or pause button has been pushed first. z 5. the button for 3 seconds to switch OUTRO function. Note: OUTRO is not available for MP3 music. 6. The buttons are direct access keys (0~9). To select the number of the 7.
*Speed Control (SEARCH indicator off) 10. PITCH CONTROL SLIDER Rotating the wheel, in play mode, will change the playback speed accordingly. While rotating clockwise, the player speed increase; rotating counterclockwise, the speed decrease. To match the choices of playback speed (8%, 16%, 32%, 100%), you can choose what range you want between minimum (up side) and maximum (bottom side) by moving the pitch control slider. *Search (SEARCH indicator lights) 11. SAM.
LCD INSTRUCTION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. TOTAL TRACK – the track number of the CD or CARD. 15. MINUTES – Shows the minutes elapsed or remaining 16. SECONDS – Shows the seconds elapsed or remaining 17. FRAMES – The CD Player breaks down a second into 75 depending on mode setting. – The unit is in playing. – The unit is paused depending on mode setting. SINGLE – Shows when the unit is set to play only one track. CONT – Shows when the unit is set to play the all tracks continually.
Connections Typical connections with a mixer is illustrated below. Please use it for reference. * Connect the connection cords to the line inputs of your mixer. * The connection cords and the remote control connection cable are supplied with the main unit. * Be sure to use the remote control connection cable which has been supplied. Use of another cable type might cause damage.
BASIC OPERATION Loading and Ejecting the Disc When the disc is loaded, press the EJECT button to eject the disc (This may be done on either the player or the remote control side.) Place a disc in the disc loader 8 cm disc 12 cm disc Push the disc to the loader. Ø While the disc is loaded, the preparation for disc play will begin. Ø When preparation is completed, the total tracks number & total playing time will display.
TRACK SKIP To go back through the tracks To advance through the tracks Tracks change as follows Tracks change as follows (This is for a disc containing 4 tracks) When this button is pressed once, the CD player will When this button is pressed once, the CD player skip backward to the beginning of the track, press will advance to the beginning of the next track. twice will skip backward to the previous track.
MATCHING THE BEATS PER MINUTE Match the pitch by monitoring the music of both UNIT 1 and UNIT 2 by ear. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the + side and match the tempo. When fast, move to the - side. The following description is for the case of matching the pitch of UNIT 2 to the pitch of the music being played on UNIT 1. Bu f f er M em o ry Press PLAY/PAUSE to start UNIT 2. UNIT 1 is playing.
OPERATION OF CUE (WITH PLAY/PAUSE) 1. In pause mode, press CUE button to memorize a point for playing back. We mean it “cue point”. 2. After “cue point” is memorized, in play mode, pressing CUE button will return the music back to the cue point and keep it in pause mode. 3. Press PLAY button again to perform from “cue point”. OPERATION OF A AND B/LOOP 1. Set “A POINT” under play mode by pressing A button (without interruption during playback). 2.
BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power, ensure that the disc is ejected Do not switch off the power when the disc in the loader. Switch off the power after the disc is ejected. POWER OFF POWER OFF TROUBLESHOOTING GUIDE If difficulties arise with your compact disc player, locate the apparent problem in the left-hand column of the table and follow the corrective action suggested in the right-hand column. 1.
www.pyleaudio.com IMPORTANT: Pack carefully in original carton if possible. We are not responsible for damage incurred in returning items for repair. A letter stating your exact street addres, daytime phone number, and the problem you are experiencing should be included.
