PCLRMU2 This unit is operated by four keys: MODE / - RESET / + SET EL FEATURES: Time Intelligent Step Filter Function 7 Days Data Memory Record Target Step Alert Alarm Exercise Time Total Distance Total Calories User Setting USB PC Link Interface Program Low Battery Detection Energy Saving Function 3D SENSOR FROM USA – MEASURES YOUR MOVEMENT ACCURATELY
BACK LIGHT - The 3D technology in the accelerator is an accelerometer sensor that detects and measures acceleration in walking or running. - 3D Sensor has intelligent step filter function-steps which only starts counting when the unit detects continuous movement for over 10 seconds. - 3D Sensor allows users to customize to their specific body type for Walking/Running style. PERSONAL TRAINER Thank you for choosing AnyRun as your personal trainer.
any keys or sensor receive motion. The pedometer mode will also be off during transportation for energy saving purposes. IDEAL PLACEMENT NORMAL WALKING MEASUREMENT Before you track the number of steps you take as you go about your normal daily life, you need to preset the following personal information before using the unit.
walking. During that time, it will not display a step count. Once the watch determines that you are walking, it will display your entire step count from the beginning of your walk, including the steps you took while the watch was not displaying a step count. This is the intelligent step filter system to prevent the inclusion of false motion. 3. The step counting data are saved automatically at midnight each day and all data are cleared to zero.
2. To clear the exercise time, press and hold Reset/+ button for 3 seconds Note: Removal of any of the above set of data will remove all the data for that day. MEMORY DATA MODE 1. Press the MODE key until you have reached the Memory Data Mode 2. Press Reset/+Set Button to select the date you want to view 3. Press Set Button to view the data : Step – Distance – Calories Burnt – Exercise Time TOTAL MODE 1. Press the MODE key until you have reached the Total Mode 2.
USER SETTING Time Setting 1. Press the MODE key until you have reached the Step Counting Mode 2. Press and hold Set Button for 3 seconds to set the TIME FORMAT 3. Press MODE/- or RESET/+ button to change the format 4. Press the SET button to enter next setting – HOUR 5. Press MODE/- or RESET/+ button to increment or decrement the setting data 6. Press the SET button to enter next setting – MINUTE 7. Press MODE/- or RESET/+ button to increment or decrement the setting data. 8.
9. Press MODE/- or RESET/+ button to select CM or INCH 10. Press the SET button to enter next setting – STRIDE LENGTH 11. Press MODE/- or RESET/+ button to increment or decrement the setting data. (Default:80cm/30”, Range:30-213cm/12”-84”) 12. Press the SET button to enter next setting – WEIGHT 13. Press MODE/- or RESET/+ button to increment or decrement the setting data. (Default:45kg/100lb, Range:20-227kg/50-500lbs) 14. Press the SET button to enter next setting – TARGET STEP 15.
When you finished the target steps (100%), the icon will be full of 10 icons and will flash together with a beeping alarm for 30 seconds Note: No buttons pressed or held for 60 seconds will automatically trigger the unit to return to step counting mode. DOWNLOADING/INSTALLATING PC-LINK PROGRAM Please visit our website at http://www.anyrun.com/k515m.
First User: 1.
1. Unit will automatically upload the data to PC once plugged into the computer 2. Login the program and enter to the Main Screen 3. Click any button to select the desired report or data.
4. Press the SEND button to export the excel data file by email.
INSTALLING THE BATTERY The Watch uses 1 piece CR 2032 batteries. Use only the recommended batteries. NOTE: Changing the battery will erase the data in the watch previously input into the device and you can then/will need to re-set the watch all over again. 1. The battery compartment is located at the back of the unit 2. To install/replace the battery, unscrew the battery compartment with the screw driver and simply slide afterwards 3. Take out the old battery and dispose of properly 4.
Exhausted batteries should be removed from the product Non-rechargeable batteries are not to be recharged Rechargeable batteries are to be removed from the product before being charged Rechargeable batteries are only to be charged under adult supervision Different types of batteries, new and used batteries are not to be mixed.
