Specifications
Setting the low-pass frequency
Set the low pass frequency switch on the top
of
the Equalizer to either 60Hz
or
90 Hz depending on the subwoofer and subwoofer amplifier requirements.
Connecting an MP3 player or video unit
1.
Plug the MP3 player or video unit into the auxiliary RCA input
on
the back of the
Equalizer unit.
2.
Make sure the auxiliary button
on
the front of the unit
is
out, ready
to
receive input
from the main
RCA
input (not the auxiliary
RCA
input).
3.
Turn
the
master volume to a normal listening level.
4.
Press the play button
on
the auxiliary source.
5.
Push
in
the AUX button
to
change
to
the auxiliary source.
6.
Using a small flathead screwdriver, adjust the AUX gain controls located
on
the top
of the unit
so
that the volume of the auxiliary source matches the volume of the
main
source.
Care and maintenance
Cleaning
the
cabinet
Use a soft, dry cloth
to
gently wipe dust
and
dirt from the unit.
Do
not use benzene, thinner, car cleaner, or'ether cleaners. These substances may
damage
the
unit
or
cause
the
paint
to
peel.
Servicing
the
equalizer/crossover unit
In
the event that trouble arises, never open the case or disassemble the unit. The
internal parts
are
not serviceable
by
the user. Opening any components will void the
warranty.
5
WARNING!
Changes or modifications
to
this
product that are not approved
by
the
manufacturer will void
the
warranty
and
will violate FCC
approval.