PDA User Manual

Appendix C: SCU For 802.11b/g Radio
Profile Tab
Ikôn Rugged PDA (Windows CE 5.0) User Manual C-5
The following table describes the options in the Radio attributes, Encryption, and EAP Type
drop-down menus:
Table C.1 Radio, Encryption, And EAP Menus
Radio
Attribute
Description Value Default
SSID Service set identifier (SSID) for
WLAN to which the radio connects.
Maximum of 32 characters. None
Client
Name
Name assigned to radio & Ikôn into
which it is installed.
Maximum of 16 characters. None
Power Save Power save mode for radio. CAM: Constantly awake.
Maximum: Maximum power sav-
ings.
Fast: Fast power save mode.
Fast
Tx Power Maximum transmit power. Max: Maximum defined for
current regulatory domain.
Measured in mW: 50,30,10, 1.
Max
Bit Rate Used by radio when interacting
with WLAN access point.
Auto: Rate automatically negoti-
ated with access point.
Rates in Mbps: 1, 2, 5.5, 6.9 11,
12, 18, 24, 36, 48, 54.
Auto
Radio
Mode
Used by 802.11g when interacting
with access point.
B rates only: 1, 2, 5.5, & 11 Mbps.
G rates only: 6, 9, 12, 18, 24, 36,
48, and 54 Mbps.
BG rates full: All B and G rates.
BG rates optimized: 1, 2, 5.5, 6,
11, 24, 36 & 54 Mbps.
BG rates
optimized
Auth Type 802.11 authentication type used
when associating with access point.
Open, shared-key, or LEAP (Net-
work-EAP).
Open
EAP Type Extensible Authentication Protocol
type used for 802.1X authentica-
tion to access point.
None, LEAP, EAP-FAST, PEAP-
MSCHAP
– To use EAP-TLS, you must
use WZC.
None