PDA User Manual

Chapter 5: Configuration
The Bluetooth GPRS WAN Connection
Ikôn Rugged PDA (Windows CE 5.0) User Manual 119
NQuery Retry (Name Query Retry) governs the number of times the Ikôn will attempt to
query the names of other Bluetooth devices if the first attempt fails. (When the Ikôn scans
for other devices, it sometimes fails to scan names.)
5.6.1.7 Search For
The Search For menu allows you to specify the services for which the Bluetooth radio
will scan.
5.6.2 The Bluetooth GPRS WAN Connection
The following steps describe how to set up an internet data connection using a GSM cellular
telephone with Bluetooth. The Ikôn communicates via Bluetooth to the cell phone, which
then accesses a WAN (Wide Area Network) and transfers data using GPRS.
1. Enable the Dial-Up Networking service in the cell phone.
2. Make the phone discoverable.
3. Pair the phone service with the Ikôn Dial-Up Networking service using the
Bluetooth Manager (for instructions on pairing devices, see “Devices” on
page 112).
Note: Keep in mind that setting this parameter to a higher value will lengthen the
scan time.