DVD/VCD/CD/MP3 PLAYER
Play/Pause Scan Repeat Random Stop Receiption collection Speaker collection N/P Install the unit Remove the unit Band Band tuner Power Volume Eject Release Mode Loud L/R Clock Dsp Loading and Replacing the battery Basic operation Volume setting Bass setting Treble setting Balance setting Fader setting 1
CAUTION Do not operate when driving. To prevent electric,etc,Please do not let the metal goods(silver,coin,tools..)fall into the installation. If you smell or see smoke,turn off the power immediately and consult our dealer. Be careful not to drop or shock the unit strongly. Do not touch the liquid crystal to avoid the life hurt.If the clothes is stained with it,Please clean it immediately by soap.
RED To front left speaker To front right speaker To rear left speaker To rear right speaker 3
Before installing the receiver permanently, fit it in the approximate place in your car ,and connect the equipment according to the speakers and electrical connections. When your system is operated properly,(preferably with the car engine running), follow the instructions 3)Support strap for permanent installation (supplied) of your system. 1)Install half sleeve, can be with or without adapter. It will fit better with adapter. 2)Bend over some tabs to secure the half sleeve inside of dash.
Rotate the SEL/VOL button to set the hour. Selecting radio and play Each time you press the key,it will switch between radio position and disc position. Press the SEL/VOL button,and then rotate it to set the minute. there is no operation in 5 seconds, it will quit clock set mode. DSP press the DSP button to emphasize the bass output, press it again to resume the normal listening. In VCD mode, press [BAND] button,it will switch between right channel and left channel position.
SELECT VOLUME PWR VOL SEL SEEK SCN DSP PLAY/PAUSE Press SEL/VOL button once,display will show VOL on,then rotate the button in clockwise direction to increase volume level;rotate the button in anticlockwise direction to decrease volume level. 1 2 RPT 3 RDM 4 STOP 5 N/P BAND CLOCK MODE 6 SCAN REPEAT RANDOM STOP N/P Press SEL/VOL button third, display will show TRE on, then rotate the button to adjust treble level up/down in different direction.
If with DISC in unit,Press the [ Press the [ ]to pause music. Press this button to play all the track in random order. Press it again to stop random playing. This button is invalid if the unit is in PBC On mode. ]button again , come back DISC playing. If a disc is loaded,a sector sign will show on the display. Press STOP button to stop music,and press to start playing from track one. button Press this button once for TRACK INTRODUCTION. The first 10 seconds of each track on the disc will play.
SEEK- PWR manual tuning: VOL SEL short press Short press SEEK SCN DSP 1 2 RPT 3 RDM STOP 4 PRESET MEMORY 1-6 5 N/P BAND CLOCK MODE 6 BAND long press button can automatically select higher frequency station. And long press can automatically select lower frequency station. SEEK+ Press BAND button to select among three FM or two AM bands. (FM1-FM2-FM3-AM1-AM2) RCOK button it can select higher frequency station. can select lower frequency station.
Use one lithium battery(CR2025) Insert the batteries with the +and - poles aligned properly. Following the illustration inside the case. Pull out Store unused batteries out of the reach of children.contact a doctor immediately if the battery is accidentally swallowed. Do not set the remote on hot places such as the above dashboard.
Press this button to turn on/off the unit. Under receiving position,press this button can select band; under VCD,DVD position,press this button can select automatic,PAL or NTSC. Press this button can show the time,and long press to enter clock adjustment. Press this button can increase or decrease volume. Press this button can select needed receiving and playing mode. Under receiving position,press this button can do far and close switch;under VCD,CD playing,press this button can play randomly.
When playing VCD,OK disc,press this button can show all the prgramme menu,and can cooperate numeral buttons to select programmes. DI- DI+ EQ [ ][ ] [ ][ ] Under DVD mode, press this button can move cursor in up,down,left and right directions after entering SETUP Menu.Press ETR button can confirm selected item. Title Angle Under receiving state,press this button can scan memory stations.Long press it can automatically scan and store them.
Under DVD mode,press this button can change visual angle. DI- DI+ EQ Under VCD mode,press this button can advance slowly. Under DVD mode,press this button can advance and back off slowly. Under DVD mode,press this button can switch dialogue language. Press this button can directly select track and chapter,and 1-6 buttons can select preseted stations. Title Angle Under VCD mode,press this button can switch track. Under DVD mode,press this button can switch dialogue language.
Universal Setup Audio Setup Initial Stages Setup Exit Menu Setup Press[ ]or[ ]then press ENTER 14
Press[ Press[ ]or[ ] Press[ \ ]or[ ]then press ENTER TV Format Picture Mode Angle Sign Menu Display Language Hide Caption Screen Protection TV Format Picture Mode Angle Sign Menu Display Language Hide Caption Screen Protection Homepage Homepage ]or[ ] TV Format Press[ \ ]or[ Screen Protection Homepage Homepage Menu Display Language Hide Caption Normal/Full view Normal/Mail Box Wide Screen ]then press ENTER TV Format Picture Mode Angle Sign Menu Display Language Hide Caption Screen P
Open Close 16
Press[ ]or[ ] Press[ \ ]or[ ]then press ENTER Audio Output OP MODE Left+Right DYNAMIC Audio Setup LPCM Output Audio Output OP MODE Left+Right DYNAMIC Audio Setup LPCM Output Homepage Press[ Stereo Left Right Mix Homepage ]or[ ] Press[ \ ]or[ ] Audio Output OP MODE Left+Right DYNAMIC Audio Setup LPCM Output Press[ \ ]or[ ]then press ENTER Audio Output OP MODE Left+Right DYNAMIC Audio Setup LPCM Output Press[ FULL 6/8 4/8 2/8 Homepage DYNAMIC RANGE COMPRESSION Homepage OFF FULL D
Press[ \ ]or[ ] Press[ \ TV Format Default Period \ ]or[ Press[ ]then press ENTER TV Format Default Period Homepage Press[ ]or[ TV Format Sound Caption Dish menu language Age Cortrol Setup Code Default Period Homepage Press[ \ ]or[ Press[ ]then press ENTER TV Format Sound Caption Dish menu language Age Cortrol Setup Code Default Period Homepage ]or[ ] Press[ \ \ ]or[ ] TV Format Sound Caption Dish menu language Age Cortrol Setup Code Default Period Homepage English French Spais
Press[ \ ]or[ ] Press[ \ TV Format Sound Caption Dish menu language Age Cortrol Setup Code Default Period Homepage TV Format Sound Caption Dish menu language Age Cortrol Setup Code Default Period Homepage \ ]or[ ] Setup Menu TV Format Sound Caption Dish menu language Age Cortrol Setup Code Default Period Homepage ]then press ENTER Press[ \ ]or[ ] Press[ \ ]or[ ]then press ENTER Setup Menu Setup Menu Press[ ]or[ Press[ \ ]or[ 1G 2 3 PG 4 PG 13 5 6 PG-R 7 NG-19 8Adult ]then press
Mp3 menu Inser t MP3 disc,and TV will show menu as follows: Press[ \ ]or[ ] Press[ \ ]or[ ]then press ENTER DOWXMIX CENTER REAR SUBWOOFER CNTR DELAY REAR DELAY TEST TONE DOWXMIX CENTER REAR SUBWOOFER CNTR DELAY REAR DELAY TEST TONE Homepage Homepage 3 MP 3 MP 3 MP 3 MP 3 MP LT/RT STEREO OFF In this menu,the right is the submenu of the left,and it can cooperate remote control[ ][ ][ ][ ]buttons to select wanted contents and programmes and press ENTER to confirm.
Exter nal view ........ Number of items Exter nal view ........ Number of items 1 ............ 1 6 ............ 1 2 ............ 1 7 ............ 1 3 ............ 1 8 ............ 1 4 ............ 1 9 EQ Title ............ 1 Angle Audio 5 ............2 The use of any accessories except of those provided might result in damage to the unit .Make sure only to use the accessories shipped with the unit ,as shown above.
Signal/Noise radio......................................................70dB Frequency response..............................20Hz-20KHz(+3dB) Channel separation..................................................>45dB Dual D/A converter......................................................16Bit Operating power....................................12 Volts DC,negative ground %10THD output wiring.........................
23
O WNER'S MANUAL Before installation and operating the unit please read this manual thoroughly and retain it for future reference
