User's Manual
1. 
TIPS FOR BETTER PERFORMANCE 
1. 
When opening or closing the turntable cover, handle it  gently, moving it either at the center or 
equally from both sides. 
2. Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or a 
record's edge 
3. 
Clean the stylus tip frequently, using a soft brush with a back-to-front motion only. 
4. 
If 
you use a stylus cleaning fluid, use it very sparingly. 
5. 
Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount 
of 
mild detergent solution to clean the turntable and dust cover. 
6. 
Never apply harsh chemicals or solvents to any part 
of 
the turntable system. 
7. 
Prior to moving the  turntable, always  unplug it from  the  AC  outlet and fasten the tone arm on 
the tone arm rest with the vinyl twist-tie. 
o  MAINTENANCE AND CARE 
Caring for the player 
•  Apparatus shall  not be exposed to  dripping  or splashing and  no objects  filled with  liquids, such 
as 
vases, shall be placed on the apparatus. 
•  The maximum ambient temperature: 
35 
"C 
•  Electronic products 
of 
this  kind 
shoblld 
never be subjected 
to 
extreme temperatures or high humidity. 
For instance, this set should not 
be 
placed in bathing areas 
of 
around stoves and radiators. 
• 
If 
anything falls into  the  cabinet,  unplug the unit and have  it checked by  qualified  personnel before 
operating it any further. 
Cleaning the 
Unit 
• 
To 
prevent fire or shock hazard, disconnect your unit from the AC power source whcn cleaning. 
•  The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution 
when cleaning and wiping the plastic parts. 
•  Mild soap and a damp cloth may be used on the front panel. 
Inclination 
•  Do not install the unit in a inclined position, 
It 
is designed to be operated in a horizontal position only. 
Condensation 
• 
If 
the unit is brought directly from a cold to a warm location, moisture may condense inside the player, 
and cause  damage 
it. 
When you  first install the  unit, or when  you move  it from  a  cold  to a warm 
location, wait for 
30 minutes before operating the unit. 
• 
Disconnect Power 
• 
If 
you  are not going to  use the  player for long time, be  sure  do discounect the  player from  the  AC 
power source. 




