Data Sheet
Table Of Contents
- 1PYGATE main
- PYGATE p.02 Content
- PYGATE p.03
- PYGATE p.04
- PYGATE p.05
- PYGATE p.06
- PYGATE p.07
- PYGATE p.08
- PYGATE p.09
- PYGATE p.10
- PYGATE p.11
- PYGATE p.12
- PYGATE p.13
- PYGATE p.14
- PYGATE p.15
- PYGATE p.16
- PYGATE p.17
- PYGATE p.18
- PYGATE p.19
- PYGATE p.20
- PYGATE p.21
- PYGATE p.22
- PYGATE p.23
- PYGATE p.24
- PYGATE p.25
- PYGATE p.26
- PYGATE p.27
- PYGATE p.28
03
Version 1.1
y
g
ate
go invent
Tact switch to
enter
programming mode
to lithium battery
VCP over USB to
configure gateway
from a terminal
console
battery charging in
progress indication
led
lithium battery
charger
4.2v / 450ma
sockets to pyethernet
module with on
board power over
ethernet(poe)
receiver
digital baseband
chip handling LoRa/
(G)FSK packets
LoRa Tx/Rx activity
indication leds
RF front-end with
integrated Rf Tx power
amplifier (PA) and Rx low
noise amplifier
(LNA)V
sockets to one of pycom modules
such as Wipy3, Gpy, Lopy4
low power digital i and q rf
multi-phy mode tranceiver
LoRa antenna
U.FL connector
LED on when
pic is
powered
(green light)
Tact switch to enter
save boot
Size: 42mm x 20mm x 3.5mm