User Guide
16
Program setup
1.Press SHARE + OPTIONS, Hold for 3 seconds 
 until the green LED is on.
2.Press the programmable button, and the 
 green LED starts blinking.
3.Press program source button. The green 
 LED is off. Program is set.
Clear single program
1.Press SHARE + OPTIONS, Hold for 3 seconds
 until the green LED is on.
2.Press programmed button and the green 
 LED starts blinking.
3.Press programmed button again and the 
 green LED is off. Single programmed button 
 is cleared.
Clear all programs
1.Press SHARE +OPTIONS, Hold for 3 seconds 
 until the green LED is on.
2.Press OPTIONS and hold for 4 seconds. The 
 green LED is off. All of the programmed 
 buttons are cleared. Default is restored.
Note: All of the settings will NOT be cleared
 when the wheel is power off. All settings 










