Quick Sta! Guide v1.0.1 English Pxierra Ai Baby Monitor Floor Stand Suit 1 Models: TVD6003H 1.0.
Contents Status Reference page 2 Safety page 3 Notice page 4 Advices page 5 In The Box page 6 What prepare by yourself page 7 Let`s Get Sta!ed page 8 Installation Options page 9 Limited Warranty & Compliance page15 Status & Reference Night LIght & Status Light Speaker Mic Array Reset Button Ve!ical Axis Halo Horizontal Axis Halo Light Sensor Temperature & Humidity Sensor Starlight Color Image Sensor Invisible Infrared Led Constant light up 10 seconds Initial Boot Successfully Si
Safety Pxierra Ai Baby Monitor was created to help parents track factors that a#ect their baby’s safe sleep and general review.This product cannot replace adult supe"ision. Ensure your child’s health by checking on him/her regularly. It is not designed to cure, treat, or prevent any disease or health condition, including, but not limited to, Sudden Infant Death Syndrome (SIDS). No baby monitor can ever replace you as a caregiver, or substitute for asking your doctor for medical advice.
Notice • This device is designed for indoor use only. • Install in accordance with building and installation codes and standards where your baby live; • This product is designed to be mounted behind a standard crib and against the wall only.
Advises •Use a !rm sleep su"ace. •Do not put anything (pillows, blankets, stu#ed toys, or crib bumpers) anywhere baby’s sleep area. •Babies should not sleep in an adult bed, on a couch, or on a chair alone, with you or anyone else. •Babies should not sleep in swings, car seats, or carriers. •Have your baby share your room, not your bed. •Do not let your baby overheat during sleep. •Do not use devices and products (wedges, positioners) that claim to reduce the risk of SIDS/SUID.
In the box Monitor Mount USB Cord Power Adapter Crib Edge Grip Floor Stand Leg Baby Monitor Elbow Connector Extension Tube Base Tube 6
What prepare by yourself Android Phone / iPhone /iPad WiFi Router 2.4G & 5G Tapeline (3m/120inch) microSDHC UHS-I Not be used with Rocking Crib. This is a necessa! condition for safe sleep monitoring properly. The 32GB microSDHC card can roll store for about 7 days video playback, and the maximum capacity is 128GB, which for about 28 days video playback.Use with microSDHC card that meet UHS-I or higher to ensure compatibility.
Let`s Get Sta!ed Search and download the Android App or iOS App VitaRadar for Pxierra Ai baby monitor. ! VitaRadar " Download the Vitaradar app and set up your account . Follow the in-app instructions to set up your Pxierra Ai Baby Monitor . You can choose to follow the assembly instructions in-app or in this booklet . Need Help Video Guidance www.pxierra.com Sent Message @pxierra / @pxierrababymonitor Sent Email suppo!@pxierra.
Installation Options Position the crib against the preferred wall with at least 5 inches (12.7cm) distance in the nurse!. In order to obtain the best viewing angle and comfo"able use experience, please mount up the Pxierra Ai Baby Monitor in the middle position behind the Crib, or determine the speci#c installation position of the device through the APP live preview. Notice: The power socket should be placed within 2m from the crib.
Assemble stand, bottom to top.
Screw three FLOOR STAND LEGs and ELBOW CONNECT together. Then thread the TYPE-C end of the USB cable up through the hole in the center of the Elbow bottom. Push together the MOUNT to the BASE TUBE and second EXTENSION TUBE and RETRACTABLE TUBE. Then screw RETRACTABLE TUBE and ELBOW CONNECT together.
Push the USB cord through the rest of the EXTENSION TUBE in sequence, and mount them together by screwing the EXTENSION TUBE. Choose between three EXTENSION TUBEs or two EXTENSION TUBEs as instructed. First, inse! the USB-C plug rese"ed in the MOUNT into the USB-C socket inside the MONITOR neck, and then inse! the MONITOR and CORD back to the opening of the MOUNT together until the locking device of the MOUNT gives rebound feedback to complete the installation of the MONITOR.
The MONITOR installed on the MOUNT can be manually rotated 170 degrees from front to back and 170 degrees from left to right to position its orientation. The appropriate Angle needs to be adjusted according to the live stream screen in the VitaRadar APP. Please refer to the application introduction of the APP for speci#c methods.
Inse" the POWER ADAPTER into the power socket, and then inse" the USB-A plug into the USB-A socket of the POWER ADAPTER to power on and activate the entire device. During the installation of EXTENSION TUBE, CRIB EDGE GRIP is !tted into the EXTRA TUBE, or HOOK&LOOP is used to bind crib edge to the assembled FLOOR STAND, so as to prevent the FLOOR STAND from falling down.
Limited Warranty & Compliance The full information on Pxierra’s Limited Warranty visit: Pxierra.com/legal/warranty Pxierra, Inc. | Pxierra Ai baby monitor | Model No: TVD6003H This device complies with pa! 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inte"erence, and (2) this device must accept any inte"erence received, including inte"erence that may cause undesired operation.
RF POWER SPECIFICATIONS Radio Frequency 2.4G WiFi 2.4-2.4835 GHz 23.09dBm 5.15-5.25 GHz 12.75dBm 5.725-5.850 GHz 12.61dBm 5G WiFi Max. Output Power POWER SUPPLY INFORMATION Input Voltage Input AC frequency Output Voltage Output Current Output Power 100-240V 50-60Hz Average active e!ciency 83.65% 5V E!ciency at 10%load 80 .60% 16 1.0-2.1 A 11W No load power consumption 0 .
