Setup Guide

15
• Willconnectautomacallytothe
boomunitspower.
• Stackedunitsshouldsitdirectly
ontopoftheboomunit,with
thefeetofthetopunit‘nesng’
intothetopoftheboomunitas
perthevisualopposite.
• Pleaseensurethatanyexposed
powerconneconpointsare
coveredbytheprovidedpin
covers.These pin covers are only
to be used on the top exposed
pins of the top unit (as shown
in the visual opposite, and the
boom exposed pins of the
boom unit (as shown in the
visual opposite).
• Note: The visual opposite refers
to the boom unit ONLY. Do not
cover the boom pins of the top
or center unit as this will disrupt
power between the units.
Please refer to next page
Applying Pin Covers